Displaying items by tag: Aman Group
Aman Group inaugurates new mill
24 May 2017Bangladesh: Aman Group has opened its second cement grinding plant at its Narayanganj complex, located 20km south of the Bangladeshi capital Dhaka. The new plant has a production capacity of 10,000t/day (~3.5Mt/yr), which, along with its first grinding plant, comfortably makes Aman the largest cement producer in the country. Commerce Minister Tofail Ahmed inaugurated the plant at the International Convention Centre Bashundhara in Dhaka on 23 May 2017.
Germany’s Loesche GmbH supplied the LM 56.3+3 CS type mill, which can grind Portland or composite cement to a fineness of 3200 Blaine. It can also grind granulated blast furnace slag at 175t/hr to a fineness of 4500 Blaine. In addition to the mill, the scope of supply also included additional technical equipment for the grinding plant such as a rotary feeder, 2-way chute, metal detector and permanent magnet drum separator.
Loesche receives mill order for Haria cement plant in Bangladesh
01 February 2017Bangladesh: Loesche has received an order to supply a 56.3+3 CS type vertical roller mill for the Aman Group’s Haria 2 cement plant at Narayangonj near Dhaka. The contractor for this order is the China National Heavy Machinery Corporation (CHMC). It follows a previous order by the Aman Group for a Loesche LM 56.3+3 CS mill that was supplied in 2014 for the Haria 1 line. The new mill was supplied in late 2016.
The roller mill for the Haria 2 line has a production capacity of 240t/hour for Portland and composite cement clinker with a fineness of 3200 Blaine or 175t/hour of ground-granulated blast-furnace slag (GGBFS) with a fineness of 4500 Blaine. It has a drive power of 5300kW. In addition to the mill, the scope of supply also specifies additional technical equipment for the grinding plant including a rotary feed, a two-way chute, a metal detector and a permanent magnet drum separator.