Displaying items by tag: Refractory
South Africa: Sephaku Cement has reported a second unexpected kiln stoppage at its integrated Aganang plant in Lichtenburg. It attributed the second delay on the need for a repair to the inside of the kiln. The second stoppage started on 16 October 2021 and was expected to be completed by 26 October 2021. Previously, the kiln was stopped from 30 September 2021 to 6 October 2021 due to preheater refractory material damage caused by a corrosive element in one of the raw materials being used. The producer said that the raw material was subsequently replaced with an alternative option. The subsidiary of Nigeria-based Dangote Cement said that the outages were expected to reduce its sales volumes.
RHI Magnesita to become majority shareholder in Sormas Refrakter
22 October 2021Turkey: Sormas Refrakter has agreed to sell 85% of its shares to RHI Magnesita for Euro38.8m. The Turkey-based refractory manufacturer has a production capacity of 60,000t/yr. The companies expect to conclude the deal in the first half of 2022
RHI Magnesita said "With an enlarged product portfolio, further potential exists from this opportunity to deliver full-line service solutions to customers in Turkey.”
RHI Magnesita and Calix Limited start agreement on CO2 emissions reduction for refractory production
05 July 2021Austria/Australia: Refractory producer RHI Magnesita and Calix say they have started a memorandum of understanding to develop a flash calciner for use in the production of refractory materials, to enable CO2 separation for either utilisation or storage. The companies have agreed to run studies up to and including basic front-end engineering and design for a commercial-scale demonstration facility at an RHI Magnesita site.
RHI Magnesita and Calix started discussing a collaboration in early 2019. The application of Calix's technology to refractory products has been the subject of pilot scale test work during 2020, with larger scale test work currently underway.
Luis Bittencourt, chief technology officer of RHI Magnesita said, "We are pleased to be working with Calix on this project, which is a key part of the research and development programme on CO2 emissions reduction that we are carrying out over the next five years. Together with our partners at Calix, we are seeking to develop new technologies for the capture, storage and utilisation of CO2 that would otherwise be emitted during the refractory production process." Phil Hodgson, the managing director of Calix added that the company was also looking at strategic opportunities in its magnesium oxide businesses.
Refratechnik and Höganäs Borgestad start strategic agreement for supply of refractory products to Nordic countries
10 March 2021Germany/Sweden: Refratechnik Group and Sweden-based Höganäs Borgestad Group have started a strategic agreement for the supply of refractory products to customers in Nordic countries. Höganäs Borgestad customers will now have direct access to the product range and application knowledge of the Refratechnik Group. The refractory suppliers said that their arrangement, “underscores the desire of both companies for long-term, sustainable and mutually beneficial partnerships; resulting in a secure supply of top-quality product for the customer.”
Germany-based Refratechnik Group operates refractory and industrial mineral businesses, with over 1900 employees in 27 locations worldwide. Sweden-based Höganäs Borgestad is the largest refractory company in the Nordic region providing installation services and refractory materials to many industries.
RHI Magnesita’s sales, earnings and profit declines
09 March 2021Austria: RHI Magnesita recorded consolidated net sales Euro2.26bn in 2020, down by 23% year-on-year from Euro2.92bn in 2019. Its earnings before interest, taxation, depreciation and amortisation (EBITDA) were Euro140m, down by 53% from Euro300m. Pre-tax profit for the year was Euro42.0m, down by 30% from Euro200m.
The group attributed the declines to lower refractory volumes as a result of the effects of the coronavirus pandemic on market demand. It said that customers began re-stocking supply chains at the end of 2020 and into the first quarter of 2021, driving increased refractory demand. Its cement and lime business declined by 21% in 2020. The supplier said that the business recorded a ‘strong performance’ in the first quarter, characteristic of seasonal demand, followed by weak second and third quarters when demand was negatively impacted by the Covid-19 outbreak.
Chief executive officer Stefan Borgas said, “2020 has been the most challenging year that our industry has experienced. Throughout the pandemic, RHI Magnesita has protected the health and safety of our employees, ensured business continuity for our customers and taken initiatives to support liquidity and underpin future profitability. Through one of the severest downturns on record, we demonstrated the resilience of our business model and the outstanding commitment of our people while our strong financial position has enabled us to accelerate investment in our strategic priorities.”
China: The government of Jiangsu province has awarded an Environmental Protection certificate to Imerys subsidiary Calderys’ Zhangjiang refractory plant. The company said that the certification results from years of hard to enhance environmental efforts beyond national requirements. One example of the work is dust-proof partitioning around all dust-emitting equipment.
Environment, health and safety supervisor Ricken Ren said, “In 2016, the plant improved the quality of its raw materials. With major work no longer required to lessen the water content of the materials, it was able to reduce the use of its dry kiln, which uses natural gases in its drying process, in turn greatly reducing the plant’s energy consumption. ” He added, “Keeping the plant’s environmental impact as low as possible is a never-ending job, and we cannot lose focus. We perform daily checks to ensure devices such as our dust collectors are working effectively, and we are always monitoring our emissions during operation according to national laws. Every department worked together on environmental protection performance. It is a great teamwork result.”
India: Denmark-based Hasle has supplied a Hasle D59A coating-resistant castable to Asian Cement for use on the inlet chamber and riser duct at its cement plant. The supplier supervised installation. It said that the castable will reduce the required lining materials of the equipment, resulting in savings.
HarbisonWalker International updates mobile refractory tools
07 December 2020US: HarbisonWalker International (HWI) has enhanced its Mobile Refractory Tools app based on customer input to increase the ease of refractory products and services optimisation in the field. HWI customers and Contractor/Installer Network (CIN) members can use the free app to access the refractory mix calculator to compute mix ratios and times for HWI products, search safety data sheets, find HWI Global Sourcing Center (GSC) locations, and contact HWI. The company says that CIN members can also gain access to HWI's Pocket Reference Guide (PRG), which contains comprehensive product information, brick sizes, shapes and combinations, sprung arches, anchors, and area and volume data. All business portal account holders receive basic access, along with product data, including datasheets, installation guidelines, curing and dry-out schedules, and the new kiln brick calculator.
Senior vice president (SVP) Mike Werner said, “We are always listening to our customers and the latest advancements in our mobile app reflect what our contractor/installers and customers told us would help them the most on the job.” He added, “HWI app users can find and calculate what they need to know about our products and services when they need them. We're constantly innovating with technology to help our customers and the overall refractories industry, with offerings like our High Temperature Times podcast and our Mobile Refractory Tools app. On-going updates to the app are an important part of our commitment.”
RHI Magnesita launches Ankral Low Carbon refractory bricks
12 October 2020Austria: RHI Magnesita has launched Ankral Low Carbon, a 14% reduced carbon dioxide (CO2) refractory brick. Instead of raw magnesite, Ankral Low Carbon bricks contain used refractory bricks as a dead burned magnesia (DBM) source.
The company says, “Adaption of production cycles is one of four ways in which RHI Magnesita is contributing to environmental sustainability, alongside shortening transportation routes, increasing of energy efficiency and reducing the carbon footprint of raw material.”
Memories of a life in refractories
15 September 2020UK: David Jarvis, a long-time friend of Global Cement Magazine, has published a memoir of his life travelling the world, working on refractory projects starting in the 1960s and for the next four decades. His book, ‘Jazzo’s Journeys’ includes hundreds of anecdotes from more than a hundred countries around the world, many of which will raise a smile. The book is now available here.