Displaying items by tag: Product
Mexico: Cemex’s total dispatches of its Vertua reduced-CO2 concrete in Mexico reached 284,000t in 2021. After launching the product in its home country on 8 December 2020, the company supplied it to 3820 sites throughout 2021. Cemex says that it enters 2022 with 1580 orders outstanding.
Denmark: Aalborg Portland Cement says that the market ‘warmly welcomed’ its new FUTURECEM calcined clay cement in 2021. The product has reached its sales expectations for the year and is now nearly sold out for 2022. The company says that its plan to ramp up FUTURECEM production to replace 50% of grey cement production at its Rørdal cement plant is on track.
Parent company Cementir Holding says that the success of FUTURECEM rests on four pillars, namely its suitability for intended applications, targeted communication, close dialogue with concrete producers and the entire value chain and strategic partnerships with leading construction clients. It said “The lesson learned is that the market needs thorough information about new products and its industrialisation to rely on and implement them in place of conventional products.” The group added that its experience in Denmark paves the way for limestone calcined clay technology rollouts in other markets in line with its sustainable roadmap towards 2030.
Mexico/Denmark: Cemex and 3D printing construction company Cobod International have launched D.fab, a range of admixtures which enable builders to use ordinary concrete in 3D printing. The partners say that the products eliminate the need for expensive specialised mortars. Power2Build implemented the admixtures in concrete to print a whole house in Luanda, Angola, in early December 2021.
Cemex’s executive vice president sustainability, commercial and operations development Juan Romero said “The introduction of this revolutionary 3D printing system is a testament to our customer-centric mindset and relentless focus on continuous innovation and improvement. Working together with Cobod, we have developed an experience for customers that is superior to anything that has been provided in the past,” said “Our innovation efforts position us at the forefront of new technologies that contribute to building a better future.”
ASGCO launches Grizzly Screw-Splice splicing and fastening system
07 December 2021US: ASGCO has launched its Grizzly Screw-Splice, a conveyor belt splicing and fastening system. The splice is available in various rubber compounds with a tensile strength of up to 1650PIW. The supplier says that the product is stronger, wears less and has a lower-profile silhouette than traditional metal fasteners for conveyor belts. It features self-tapping and self-drilling screws that uphold the toughness of the conveyor belt by passing through the belt carcass instead of creating holes.
LafargeHolcim US launches TerCem blended cement
02 December 2021US: LafargeHolcim US has announced the launch of TerCem, a blended cement which offers 65% reduced CO2 emissions compared to ordinary Portland cement (OPC), according to the company. LafargeHolcim US will produce TerCem at its Whitehall, Pennsylvania, cement plant. The product joins its ECOPlanet low-carbon cement range.
Senior vice president sales Patrick Cleary said "We are leading a market transformation and taking a step towards a net-zero future. Our cement organisation has invested heavily in broadening the industry's range of superior sustainable products designed to lower our carbon footprint with no compromise in quality and long-term durability."
Aerzen Rental launches new TVS2500 air compressor
02 December 2021Germany: Aerzen Rental has added its new TVS2500 air compressor to its 10-bar range of air compressors. Parent company Aerzen said that it developed the TVS2500 to set the standard for power density, energy efficiency and quiet running. The compressor is designed for large material volumes. A frequency converter facilitates optimal pressure and volume flow control, while variable speed control also enables a gentle start with a low starting current. The device can be used in any existing power network. Efficient cooling inside the units further ensures a regular supply of compressed air at ambient temperatures of up to 45°C.
Lafarge Poland to stop producing CEM I by the end of 2025
01 December 2021Poland: Lafarge Poland says it plans to stop production CEM I Ordinary Portland Cement (OPC) by the end of 2025. As part of its sustainable development strategy to 2030 it intends to gradually start phasing out CEM I from the end of 2022, starting with its CEM I 42.5 R Special bagged product. The subsidiary of Holcim will switch to products in the group’s ECOPlanet range instead. So far in 2020 ECOPlanet products were responsible for 10% of the sales from Lafarge Poland’s Kujawy plant.
North Korea’s Manpho cement plant increases its capacity by 20%
29 November 2021North Korea: Manpho cement plant has increased its production capacity by 20% through ‘technical innovations.’ Korean News Service has reported that the installation of new equipment in the plant’s kiln line also improved clinker quality.
Holcim Philippines launches ECOPlanet slag cement
25 November 2021Philippines: Holcim Philippines has announced the launch of its ECOPlanet slag cement. It says the product has a 30% lower carbon footprint than other general purposes products. The company will sell 40kg bags of cement in both paper and plastic bags.
Holcim Philippines president and chief executive officer Horia Adrian said, “Winning with purpose requires delivering our customer promise while also caring for the planet.” He added, “We see a growing interest in building greener structures in the Philippines. ECOPlanet enables us to provide our partners with the best balance of delivering strength and durability while helping make construction more respectful of the environment. It is another key step in our promise to build greener, smarter and for all in the Philippines.”
Uganda: Security provider G4S has installed solar powered laser security systems for Hima Cement at one of its plants and several mines. The system was commissioned in March 2021 and it uses chargeable solar cells in perimeter security towers. G4S says that the system will improve sustainability and reduce costs compared to conventional alternatives. Where sensors detect a breach, security guards will investigate using electric bikes. The supplier says that the bikes facilitate more covert operations compared to motor vehicles, in addition to having sustainability benefits.
Head of technology Samuel Tebandeke said “We wanted to challenge ourselves to think of a better solution for our customer. We knew that we wanted to introduce electronic perimeter security to enhance the protection for the three mines and the cement plant we protect. Other providers were proposing laying many kilometres of cabling underground to provide power for their electronic perimeter monitoring, but our team decided to investigate a greener solution.”