Displaying items by tag: Belgium
Belgium: The European cement association Cembureau says that the European Union’s (EU) upcoming ‘Fit for 55’ emissions legislation must provide an enabling regulatory framework for the cement industry’s carbon neutrality roadmap. Key issues of concern to the association are the prevention of carbon leakage, the retention of free allocation and a carbon border adjustment mechanism (CBAM) until 2030 and the need for a ‘coherent package’ to boost the uptake of low-carbon technologies. It said that the industry supports the European Green Deal and the major challenge of delivering deep emissions cuts by 2030.
Chief executive officer Koen Coppenholle said “Whilst we welcome that the CBAM will seek to bridge the widening gap in carbon costs between EU and non-EU countries, the proposed phase-out of free allocation and the absence of export rebates would cause significant risks to investments.” He added “The decision not to include indirect emissions at this stage is also regrettable.”
Cembureau warns against free allowance reduction under new Carbon Border Adjustment Mechanism
25 June 2021Europe: The European cement producers’ association Cembureau says that a possible reduction of European Union (EU) Emissions Trading Scheme (ETS) free allowances would endanger cement producers’ investment decisions and projects. It says that this in turn might produce competition distortions with third parties. The EU is planning to implement a carbon border adjustment mechanism (CBAM) but the association is concerned that its ‘Fit for 55’ 55% CO2 emissions reduction target for 2030 may have negative implications for the cement industry. However, the association said that it supported the concept of a CBAM.
Cembureau has called for a transition period until 2030 whereby free allocation under the EU ETS will continue fully alongside the introduction of the CBAM. It added that this is compatible with World Trade Organisation rules and avoids any form of ‘double protection’ provided the free allocation is taken into account when calculating the levy paid by any third-party importers. It further stated that the CBAM must cover both direct and indirect emissions. It has also continued to press the legislators to provide for a CO2 charge exemption for EU exporters to third countries, if the country in question is not covered by an equivalent carbon pricing mechanism. The association asked the EU to consider implementing secondary legislation before any CBAM enters force, and to ensure consistency of ‘Fit for 55’ legislative initiatives, applied across a sufficient breadth of sectors to preclude market distortions.
Belgium: Cembureau, the European Cement Association, has elected Isidoro Miranda as its president and Ken McKnight as its vice-president at its general assembly. Miranda, the managing director of LafargeHolcim Spain, who was previously the association’s vice-president, succeeds Raoul de Parisot in the president role. Knight is a member of the CRH executive committee.
Cembureau calls for free allocation to be retained during EU’s Carbon Border Adjustment Mechanisms roll-out
08 February 2021Belgium: The European cement association Cembureau has called for the European Union (EU) to continue to permit the free allocation of carbon credits under the EU Emissions Trading System (ETS) until it completes the roll-out of Carbon Border Adjustment Mechanisms (CBAM) in 2030 at the earliest. It said that this would provide indirect cost compensation and mitigate the risk of the relocation of industries. It would additionally incentivise emissions reduction by EU suppliers, ensure a smooth implementation of CBAM in the event of challenge to CBAM by the World Trade Organisation (WTO) and mitigate distortions on the EU internal market, according to the association. It gave the example of cement producers competing with other building materials producers as a way in which an overlap period can limit the disruptive impact of CBAM on European value chains.
Chief executive officer Koen Coppenholle said, “A pragmatic approach is needed regarding the interaction of CBAM with the existing carbon leakage measures. A full co-existence of CBAM and free allocation is essential to minimise risks for the industry, avoid distortions on the internal market, safeguard the competitiveness of exports and provide certainty for investors. Such full co-existence, which can be done without any risk of ‘double protection,’ should last at least until the end of Phase IV of the EU ETS in 2030, following which the CBAM will hopefully be mature and expanded to cover most sectors of the economy.” He added, “CBAM is a useful tool to address the imports of products not subject to similar carbon constraints in the EU and therewith mitigates the carbon leakage risk allowing the European cement industry to deliver low-carbon investments. The Environment Committee’s report highlights some key points in this respect, notably that a CBAM should result in EU and non-EU suppliers competing on the same CO2 costs basis, that the scope of CBAM should be wide to avoid market distortions and that both direct and indirect emissions should be included.”
Italy: Cementir Holding recorded revenues from sales and services of Euro1.22bn in 2020, up by 1% year-on-year from Euro1.21bn in 2019. Cement and clinker volumes rose by 13% to 10.7Mt from 9.49Mt. Volumes registered the sharpest increase in Turkey, of 39%. Ready-mixed concrete (RMX) volumes grew by 7.8% to 4.4Mm3 from 4.1Mm3. The company maintained its 2019 earnings before interest, taxation, depreciation and amortisation (EBITDA) levels of Euro264m. It said that an improvement in performance in Turkey, Denmark, Egypt, China and Sweden balanced out negative effects on earnings in Belgium, US and Malaysia.
Chair and chief executive officer Francesco Caltagirone said, “In 2020, despite the serious pandemic, the group showed significant resilience with a 13% increase in cement volumes sold and revenue reaching the historical record. On a recurring basis, EBITDA increased by 2%, EBIT was up by 4% and yearly cash generation was Euro119m."
Under Plan 2021 – 2023 Industrial Plan, the company says that it envisages sales growth of 20% to Euro1.47bn and EBITDA growth of 29% to Euro340bn in 2023 compared to 2020 figures. It said that digitalisation investments begun in 2019 will contribute an expected Euro15m to EBITDA in 2023. As part of its sustainability commitments it has set a CO2 emissions reduction target of around 30% by 2030, with emissions below 500kg/t of grey cement. However, it said that under the future European Taxonomy criteria white cement emissions are not included.
The group is planning to invest around Euro107m from 2021 to 2023 on sustainability and digitalisation. This includes a the construction of a new calcination plant in Denmark for the production of its Futurecem product and, the installation of wind turbines with an installed capacity of 8.4MW. It is also planning to increase the alternative fuels substitution rate at its integrated Gaurain plant in Belgian to 80% from 40% and invest in the use of natural gas and biogas in some of its plants.
Cemex to participate in LEILAC 2 decarbonisation project
05 February 2021Germany: Mexico-based Cemex has announced its planned participation in Australia-based Calix and others’ LEILAC (Low Emissions Intensity Lime And Cement) 2 carbon capture and storage (CCS) project at HeidelbergCement’s Hanover cement plant in Lower Saxony. Cemex previously assisted the LEILAC partnership at its first installation at HeidelbergCement’s cement plant in Lixhe in Belgium. The company said that it will contribute to the technology's development utilising its gasification process expertise, leveraging its skills in alternative fuel (AF) consumption and computational fluid dynamic simulation design.
Global head of research and development Davide Zampini said, "Our participation in the LEILAC 2 project is another example of our continued efforts to deliver net-zero CO2 concrete products globally by 2050. We are determined to have a significant direct involvement in research and development efforts pursuing high impact technologies in carbon capture, use, and storage."
HeidelbergCement’s Hanover cement plant to host LEILAC 2 carbon capture and storage installation
03 February 2021Germany: HeidelbergCement, Australia-based Calix and a European consortium have chosen the Hanover cement plant in Lower Saxony for the second phase of the LEILAC (Low Emissions Intensity Lime And Cement) carbon capture and storage (CCS) project. The installation will capture 20% of the plant’s capacity or 100,000t/yr of CO2. The project will take place in three phases, with design completed by June 2021, a complete demonstration installation before the end of 2023 and project completion in 2025. The group previously installed a 25,000t/yr LEILAC CCS system at its Lixhe plant near Liege in Belgium, which completed its test phase in 2020.
Chair Dominik von Achten said, "The LEILAC technology has the potential to enable the cement and lime industries to efficiently capture their process emissions on an industrial scale. The pilot project in Hanover is one of several promising CO2 capture technologies that we are currently testing at full speed within the HeidelbergCement Group."
Titan Cement continues grinding partnership with Magotteaux in 2021
01 February 2021Greece: Titan Cement has signed a frame agreement with Belgium-based Magotteaux whereby the latter will continue to be the main partner for grinding media for Titan cement plants worldwide until the end of 2021. Magotteaux says that the deal follows the ‘very successful’ implementation of the first phase of a strategic partnership.
The supplier said, “Magotteaux is also proud to supply many more technical solutions to Titan, including ball mill internal cast parts such as liners and diaphragms.” It added, “The aim of this agreement is to improve Titan’s overall cost of production, by increasing the productivity, reducing maintenance cost and downtime, by using the latest technologies for the abrasive and impact applications.”
IKN presented with first clinker from upgrade at CBR Cement’s Antoing plant in Belgium
19 January 2021Belgium: IKN was presented with the first clinker from a modified calciner and IKN cooler installed at the CBR Cement integrated Antoing plant on 24 December 2020. The cement sector engineering supplier said, “We thank everybody involved for their determination and efforts in this challenging project: in spite of Coronanirus and a tough schedule there was no compromise on safety!” CBR Cement is a subsidiary of Germany-based HeidelbergCement.
Carmeuse partners with ENGIE and John Cockerill for lime plant carbon capture and utilisation project in Belgium
16 December 2020Belgium: Carmeuse has signed a joint development agreement with France-based energy transition specialist ENGIE and John Cockerill for a carbon capture and utilisation (CCU) project in Wallonia. It will concentrate CO2 from a new type of lime kiln and combine it with ‘green’ hydrogen to produce ‘e-methane.’ The hydrogen will be produced by a 75MW electrolyser plant powered by renewable electricity. The company said, “The produced e-methane will be suitable for injection into the national natural gas grid. This renewable e-methane can be used by industrial users or as an alternative fuel in the transport sector, thus allowing these sectors to decarbonise.”
Construction is due to begin in 2022 for commissioning of the installation in 2025. Its total investment cost is Euro150m. The partners have applied for funding from the EU Innovation Fund and Important Project of Common European Interest (IPCEI) fund. The project’s estimated CO2 emissions reduction over 10 years is 900,000t
Chief executive officer (CEO) Rodolphe Collinet said, “We are delighted to join forces with John Cockerill and ENGIE for the development of this very exciting and strategic project. It is a major step forward in our ambition to become CO2-neutral by 2050. This project is a very concrete and important example of Carmeuse’s strong commitment and contribution to sustainable development.”