Displaying items by tag: carbon capture
Pilot plant for Cleanker project inaugurated in Italy
30 October 2020Italy: The pilot plant for the Cleanker project was inaugurated at Buzzi Unicem’s Vernasca cement plant in early October 2020. The purpose of the calcium looping technology project is to demonstrate a technology for capturing carbon dioxide (CO2) in cement plants. Tests will be run for around 10 months with a total actual operating time of one month at most.
MPA launches UK concrete and cement net zero roadmap
07 October 2020UK: UK Concrete and the Mineral Products Association (MPA) have launched a roadmap for the concrete and cement industry to become net negative by 2050. It plans to do this through decarbonised electricity and transport networks, fuel switching, greater use of low-carbon cements and concretes as well as carbon capture, use or storage (CCUS) technology.
“We have already made significant progress to reduce carbon emissions but are under no illusion about the scale of the net zero challenge,” said Nigel Jackson, chief executive of the MPA. “Achieving this will require the wholesale decarbonisation of all aspects of concrete and cement production, supply and use. The concrete and cement industry as one sector alone cannot deliver net zero and we will only be able to go beyond net zero with concerted support from government, as well as with significant changes across the wider construction, energy and transportation sectors.” He added that the roadmap could be delivered without offsetting emissions, offshoring production facilities or ‘carbon leakage.’
The ‘Roadmap to beyond net zero’ calculates the potential of each technology and the carbon savings which can be achieved. CCUS technology is vital to delivering net zero manufacturing and according to the roadmap will deliver 61% of the required carbon savings. It intends to achieve a net negative industry by 2050 by the ability of concrete to absorb carbon dioxide during use and the thermal properties of concrete in buildings and structures to reduce operational emissions.
The MPA is also lobbying the government for a financial support model including for the capital and operational costs of carbon capture by no later than 2021. This is desired to ensure the technology can be developed, deployed and become an investable proposition in the 2030s.
Mexico: Cemex has announced the signing of a collaboration agreement with Switzerland-based alternative fuel (AF) specialist Synhelion, through which the pair aim to develop the use of solar power as an alternative heat source to fuel in clinker production. Pilot testing of Synhelion products will begin at a Cemex plant in late 2022, at a total investment cost of up to US$10m.
Head of global research and development Davide Zampini said, "Thanks to the technology that Synhelion is developing, we can bring the solar heat up to 1500°C. In the process, we can also capture the carbon dioxide (CO2), and that fits perfectly into the process of the synthetic fuel."
National Energy Technology Laboratory invests US$1.5m in LafargeHolcim CO2MENT project
18 September 2020US: LafargeHolcim says that Department of Energy institution National Energy Technology Laboratory has awarded US$1.5m of federal funding to the company’s CO2MENT Colorado project. The project aims to capture 2.0Mt/yr of carbon dioxide (CO2) from the company’s 1.9Mt/yr Portland cement plant in Florence, Colorado for sequestration underground by Occidental.
The group said, “With the successful completion of the initial scoping study in June 2020 and confirmation of Department Of Energy funding, the partnership has committed to the next project phase.”
Japan: Sumitomo Osaka Cement is working on a three year CO2 mineralisation research project from 2020 to 2022 with Yamaguchi University, Kyushu University and the New Energy and Industrial Technology Development Organisation (NEDO). The initiative plans to develop the technology to build a process that captures CO2 exhaust from cement and power plants and then mineralises it with calcium-containing waste materials. It intends to use the process practically in 2030.
Austria: Lafarge Zementwerke, OMV, Verbund and Borealis have signed a memorandum of understanding (MOU) for the joint planning and construction of a full-scale plant by 2030 to capture CO2 and process it into synthetic fuels, plastics or other chemicals. As part of the ‘Carbon2ProductAustria’ (C2PAT) project the companies intend to build the unit at the integrated Mannersdorf cement plant and capture all of the 0.7Mt/yr of CO2 emitted.
"We are committed to leading the industry in reducing carbon emissions and shifting towards low-carbon construction. We have worked consistently and successfully on the reduction of the CO2 footprint of our cement plants, products and solutions. Ultimately, CO2-neutral cement production can only be possible with the implementation of breakthrough technologies, like carbon capture, which is why we have great expectations for the C2PAT project", said Lafarge’s local chief executive officer (CEO) José Antonio Primo.
The project aims to use hydrogen produced by Verbund to allow OMV to transform the captured CO2 into a range of olefins, fuels and plastics. Borealis would then use some of these products as a feedstock to manufacture plastics. However, the companies say that, “taking the next steps towards a Zero CO2 economy will require the right financial as well as favourable regulatory framework conditions. The success of C2PAT will largely depend on whether the right financial and regulatory framework conditions are created both at the European Union and Austrian national level.”
The joint project is designed in three phases. In phase one, the partners are currently evaluating and developing a joint strategy for project development, business modelling and process engineering. Based on the results of phase one, a cluster of industrial pilot plants in the Eastern part of Austria could be technically developed and built in the mid-2020s in phase two. Phase three entails building a full scale CO2 capture and utilisation unit at a cement plant.
Lafarge Zementwerke is the Austrian subsidiary of building materials manufacturer LafargeHolcim. OMV produces and markets oil and gas, energy and other petrochemical products. Verbund is an Austrian-based electricity generator, with a focus on hydroelectric power. Borealis is a chemical company and a producer of polyolefins, base chemicals and fertilisers.
Norway: Norcem, a subsidiary of HeidelbergCement, has signed an agreement with Aker Solutions to order a CO2 capture, liquification and intermediate storage plant at its integrated Brevik cement plant. The final decision for the project depends on funding from the Norwegian government, which is expected to approve the unit in its national budget for 2021.
The project will use Aker Solutions’ Advanced Carbon Capture (ACC) technology and its S26 amine solvent. Once complete the unit will capture 0.4Mt/yr of CO2. This will be transported to the Northern Lights project for permanent storage offshore beneath the North Sea.
Norway: Private accreditation body DNVGL has certified Aker Solutions’ 400,000t/yr carbon capture and storage (CCS) system installation at Germany-based HeidelbergCement subsidiary Norcem’s 1.2Mt/yr integrated Brevik plant in Telemark as safe. HeidelbergCement Northern Europe director of sustainability and alternative fuels Per Brevik said, “The promising results from pilot testing in Brevik give us confidence that realisation of the full-scale capture plant will be successful. We trust that the project risk related to novel technology elements is low.”
Following an 18-month test of the partial installation, the certification ensures that the full-scale project will receive government funding.
Japan: Taiheiyo Cement has partnered with JFE Steel and the Global Institute for Environmental Technology to develop a carbon capture and storage system. The system will use wet alkaline earth metals extracted from steel slag to produce carbonates from exhaust gases at cement and steel plants. The partners are investigating the possibility of using these carbonates, specifically calcium carbonate and magnesium carbonate, as additives in cement production at Taiheiyo Cement’s plants. Taiheiyo Cement president Masafumi Shigehara said, “With the effects of climate change becoming apparent both in Japan and overseas, the importance of global warming counter-measures is increasing.”
Leilac-2 CCS project to begin in April 2020
30 March 2020Europe: Australia-based Calix has announced that construction will begin on its second low emissions intensity lime and cement (Leilac) carbon capture and storage (CCS) installation at a ‘European cement plant’ on 7 April 2020. ASX ComNews has reported that collaborators on the project, which has received Euro16m under the EU’s Horizon 2020 grant scheme, are Portugal-based Cimpor, Germany-based HeidelbergCement, Germany and France-based energy companies Ingenieurbüro-Kühlerbau-Neustadt (IKN) and Engie and Belgium-based minerals and lime company Lhoist. Calix has said that the 100,000t/yr process emissions capture facility will be operational in late 2024.
The company has appointed Emma Bowring Leilac-2 project leader.
The first Leilac installation was completed at HeidelbergCement’s 1.5Mt/yr integrated Lixhe plant in Belgium’s Limburg province in mid-2019.