Displaying items by tag: CEM II

Cementir Group launched two of its lower carbon cement products in the Middle East and Africa markets this week. We’ll take a look at this in more detail and cover other recent products news from cement producers.

Egypt-based Sinai White Cement will manufacture the products under Cementir’s D-Carb umbrella. One will be a Limestone Portland cement, to the CEM II/A-LL 52.5N specification EN197-1, with around a 10% clinker reduction. The other will be CEM II/B-LL 42.5N with around a 20% clinker reduction. Both of these reductions are in comparison to Aalborg White CEM I 52.5R. D-Carb is the name of Cementir’s product range for white low-carbon cements. It was launched in European markets in 2024, with II/ALL 52.5R cement, and then expanded to Asia Pacific regions, including Australia, in early 2025. Cementir says that its customers can switch to D-Carb from CEM I as it “integrates well with their production processes without requiring major formulation changes.”

In late October 2025 Dyckerhoff revealed that it was the first cement manufacturer in Germany to receive general building authority approval (abZ) for the use of CEM VI (SLL) cement in accordance with DIN EN 197-5. The German Institute for Building Technology (DIBt) granted approval for Dyckerhoff’s Lengerich cement plant. CEM VI is a newer type of composite cement similar to CEM II but with a lower clinker content. The SLL type that Dyckerhoff wants to make has a clinker content of 35 – 49 %, granulated blast furnace slag of 31 – 59% and limestone of 6 – 20%. The company says that this cement can be used in more than 60% of all concrete types produced in ready-mixed concrete plants. Its composition is also useful for low-carbon concretes when no fillers, such as fly ash, are available. Dyckerhoff added that the low hydration heat of the cement has a particularly positive effect in massive cast components.

Earlier in October 2025 Rohrdorfer held an inauguration ceremony for a new pilot unit for calcined (they say tempered) clays at its Rohrdorf cement plant. The pilot project started in July 2025 and has been processing up to 50t/day of raw clay. When Rohrdorfer launched the project in early 2024 it said that it was going to use waste heat from the main production line and was also considering the use of hydrogen to provide the remaining amount of heat required. Waste gases produced during calcination were also going to be fed back into the existing waste gas cleaning system of the clinker production line after leaving the pilot plant to further reduce emissions. Rohrdorfer said that its approach was going to be the first time waste heat recovery was going to be used in conjunction with calcining clay.

Meanwhile, in West Africa, Dangote Cement inaugurated its new 3Mt/yr cement plant near Abidjan in the Ivory Coast in mid-October 2024. Around the same time the company launched various products in the country, including its CEM I and CEM II brands 32.5R, 3X42.5N, 3X42.5R and 52.5N. This is a more traditional range of cement products compared to the ones above but note the highlighting of strength. This has been a key selling point for products in this part of the world previously, hence its focus. CEM II is a blended cement that uses lower levels of clinker. One clinker substitute in CEM II products is calcined clay. Gebr. Pfeiffer, for example, said in August 2025 that it was to supply a vertical roller mill to Ciments de Côte d'Ivoire (CIMCI) for clay grinding at its cement plant. There are also a number of other calcined clay projects in the Ivory Coast and other countries in West Africa. Further afield, JK Cement in India also started to market its LC3 clay calcined cement product line in October 2025.

Finally, US-based Amrize launched its ‘Made in America’ label for its cement range this week, “offering builders the guarantee of American manufacturing and quality, supporting American jobs and local communities.” Readers may recall that Amrize was recently owned by Switzerland-based Holcim. However, the company is currently keen to point out that its cement products are “made in the US from its raw materials and processing to manufacturing, meeting rigorous US performance standards.” Amrize does sell blended cements including FortiCem Portland-Pozzolan Blended Cement, ECOPlanet Cements and OneCem Portland Limestone Cement.

Most of the news stories highlighted above demonstrate a trend for blended cements with lower clinker factors. There’s no real change here. This has been happening for a long time and it is being driven by both profit and sustainability motives, although the current bunch of stories may also be turning up to coincide with the COP30 conference in Brazil. Note the inclusion of places outside of Europe and the drive for new blends. Another factor to consider here is protectionism in certain markets, as Amrize’s marketing drive suggests. New blends will also require new certifications, standards and approvals as is the case with Dyckerhoff’s work on CEM VI (SLL). The next trend to watch for will be the market reaction to carbon captured cements, such as Heidelberg Materials’ evoZero product. Will end users pay a premium for zero-carbon cements?

India: During the fourth quarter of the 2025 financial year (which ended on 31 March 2025), premium products constituted 16% of Shree Cement’s sales mix, up from 12% one year previously. During the period, the company further diversified its offering with the launch of two new premium cements, Bangur Marble Portland slag cement and Extra White Portland slag cement, in Bihar, Jharkhand and West Bengal. Both products are designed for maximum brightness and smoothness within their category of CEM-II Portland slag cements. The company says that its growing portfolio helped it to increase its full-year financial realisation per tonne by 5% year-on-year.

Business Today News has reported that managing director Neeraj Akhoury said "In the 2025 financial year, 74% of our cement output was blended, avoiding over 7.2Mt of CO₂ emissions."

Shree Cement crossed 60% consumption of energy from renewable sources in May 2025, Construction World News has reported. It has 582MW of installed renewable power capacity and is currently in the process of building a 1MW battery storage system at one of its cement plants in India.

UK: First Graphene and Breedon Group have entered into a development and commercialisation agreement. Together, the companies aim to enhance Breedon Cement’s CEM II Portland limestone cement (PLC) through the use of First Graphene’s graphene enhanced grinding aids and cement admixtures. Breedon will provide increased access to cement production lines in order to optimise the understanding of the processing environment and operating conditions.

Breedon Group’s Hope cement plant in Derbyshire previously conducted a 24-hour graphene-enhanced cement production trial on 28 June 2023.

France: Eqiom has launched its new reduced-CO₂ CEM II/C cement range on the French market. The range includes the Portland limestone, slag and clinker filler CEM II/CM (SL) 42.5 N cement produced at its La Rochelle cement plant. The cement is the first product to obtain NF certification from the Scientific and Technical Center for Building (CSTB) under its new standard designation EN 195-5. The producer says that in mid-2022 EN 197-5 will assimilate into the EN 206/CN standard for use in structural concrete.

Eqiom said that the range will offer its customers a more sustainable alternative to its other NF EN 197-1 certified compositions. La Rochelle cement plant operations manager Ahmed Mansouri said “We are proud of this result, which is the result of close collaboration between the different Eqiom teams. This commitment has made it possible to provide our customers with a solution with low CO₂ emissions while guaranteeing sufficient performance so as not to impact practices on the construction sites.”

Poland: The Building Research Institute has issued environmental product declarations (EPDs) for all six cement types produced at its Chełm and Rudniki cement plants and Gdynia grinding plant. The products in question were two CEM I cements, two CEM II Portland fly ash cements, another CEM II cement and a CEM III slag cement. Cemex Poland additionally obtained EPD certification for its Vertua Classic and Vertua Plus concrete products.

Materials director Michał Grys said “For us, product certification is another important step towards sustainable construction and a sustainable future. EPD declarations provide our clients with additional confirmation of the properties of products offered by Cemex Poland. They also improve their chances of obtaining LEED or BREEAM certificates for their investments.”

Germany: Master Builders Solutions has announced the addition of a new range of admixtures consisting of MasterEase and Master X-Seed to its admixtures portfolio. The company developed MasterEase and Master X-Seed to best enable European cement companies to produce cement of the EU’s new CEM II/C-M and CEM VI Portland-composite cements. Master Builders Solutions hopes that the new products will drive the construction industry’s transition to low-clinker cements and CO2-optimised concrete.

Parent company MBCC Group’s European president Christian Geierhaas said “Providing sustainable solutions is a key factor of Master Builders Solutions’ portfolio and overall strategy. Strong partnerships are essential and support and accelerate the development of significant innovations. We work with major players to continuously develop efficient admixtures to add value to our customers and achieve a long-term sustainable positive effect on the construction industry.” He added “In addition to the usual performance criteria, such as fluidity and compressive strength, our new solutions for our ready-mix customers are characterised by their outstanding robustness. Our admixtures provide an important differentiator by guaranteeing consistently high quality concrete, even upon variation of the cement type and fluctuation of the raw materials used to produce these new, more sustainable cements.”

EU: Cembureau has responded to the European standardisation organisation Cenelec’s CEN/TC 350 ‘sustainability of construction works’ rules by amending its European Environmental Product Declarations (EPDs) for CEM I, CEM II and CEM III, corresponding to Portland cement, Portland-composite cement and blast furnace cement respectively. It says the update brings the three main cement types into ‘full alignment with the EU Commission strategy for a sustainable built environment.’

UK: Aggregate Industries has launched its Lafarge Endure SR, a CEM II blended cement product that uses fly ash. It says that the product has a lower embodied CO₂, has improved plastic and hardened properties when used in concrete and has enhanced suitability for all ground types. Lafarge Endure SR is resistant to sulphates, allowing contractors and suppliers to scope a wider variety of projects. It also uses 10% less water than CEM I products to reach a workable consistency and offers improved pumpability and mixing efficiency.

“As its name suggests, Lafarge Endure SR is designed to dramatically increase the longevity of the concrete it forms a part of. It is a great solution for contractors that want to reduce the environmental impact of their build while simultaneously improving its life span,” said Steve Curley, Commercial Director at Aggregate Industries.