Displaying items by tag: ThyssenKrupp Polysius

Germany: thyssenkrupp Polysius has appointed Philip Glörfeld as Head of Business Development & Sales. He will succeed Lukas Schoeneck in the role from the start of January 2025. Schoeneck became the head of Operating Unit Green Solutions in October 2024.

Glörfeld has worked for thyssenkrupp since 2015 in business development roles. In 2020 he became the Director Business Development & Sales Europe, Africa & CIS for the Polysius business unit that later became thyssenkrupp Polysius. Prior to his time at thyssenkrupp he worked at Siemens. He is a graduate from the Steinbeis Hochschule Berlin and holds a master of business administration from the University of Plymouth.

US: Eagle Materials has awarded thyssenkrupp Polysius a contract for the modernisation and expansion of its Laramie, Wyoming cement plant. The modernisation project will result in an expansion of the plant's manufacturing capacity to approximately 1.1Mt/yr of cement. The project also includes the installation of an alternative fuel substitution system. The modernisation of the cement plant is expected to deliver benefits such as cost reductions, achieved with lower-cost alternative fuels and natural gas, simplified maintenance and improved operational efficiencies. The production expansion from the new finish mill will supplement the grinding capacity of the existing plant, which already operates with an integrated polysius booster mill. The polytrack ECO cooler will facilitate heat recovery and clinker cooling while improving process reliability. The project, which has received primary regulatory approvals, is slated to commence immediately [in November 2024], with construction scheduled for completion by the second half of 2026.

Greece: ThyyssenKrupp Polysius has signed a front-end engineering design contract with Titan Group for the Ifestos carbon capture project at Titan’s Kamari cement plant. The project will equip the plant’s two kilns with oxyfuel systems to reduce CO₂ emissions by 1.9Mt/yr, ‘almost completely’, said ThyssenKrupp. The captured CO₂ is then liquefied and transported to a permanent storage site in the Mediterranean region. Full operation is expected by the end of 2029.

Cetin Nazikkol, chief strategy officer at ThyssenKrupp Decarbon Technologies, said “With the oxyfuel technology we have developed, around 1.9Mt/yr of CO₂ can be captured at the Kamari plant alone. This corresponds to around 12% of greenhouse gas emissions from all Greek industries. We are thus making a significant contribution to one of the largest CO₂ capture projects in Europe.”

Christian Myland, CEO of ThyssenKrupp Polysius, said “For our customer Titan Group, we will be using the latest CO₂ separation technology. We will design and equip the first kiln line with the proven oxyfuel technology. When modernising the second kiln line, the latest generation of this technology will be used with the pure oxyfuel system. Overall, this will enable us to capture almost 100% of CO₂ emissions.”

France: The Eqiom Lumbres cement plant, part of CRH, has commissioned ThyssenKrupp Polysius to construct a fine grinding plant. The new plant will include the Polysius booster mill and the Sepol ultra-fine classifier, along with necessary auxiliary equipment. ThyssenKrupp Polysius is set to deliver the equipment by late summer 2025, aiming for commissioning in the fourth quarter of 2025. It will also provide on-site service and technical support for performance optimisation.

Project Manager Layal Haddad said "We are proud to be contributing to decarbonisation with the ultra-fine grinding plant and reducing the CO₂ footprint of cement. This is the first ultra-fine grinding plant based on a Polysius booster mill to be sold worldwide. We look forward to a successful project together with the Eqiom/CRH team."

Taiwan: Taiwan Cement Corporation has signed a memorandum of understanding (MoU) with ThyssenKrupp Polysius. Under the MoU, the partners will implement carbon capture projects aimed at capturing 100,000t/yr (10%) of Taiwan Cement Corporation’s CO₂ emissions by 2030. This will involve the development of a new generation of pure oxygen carbon capture technology in Line 1 of Taiwan Cement Corporation’s Hualien Heping cement plant. This technology aims to increase the concentration of captured CO₂ to over 90% and reduce the energy consumption of carbon capture. The Hualien Heping plant project will conclude in 2026, with the commercialisation of the technology to follow before 2030. Taiwan Cement Corporation plans to supply its own captured CO₂ to various other industries, including industrial welding, chemicals and food processing.

Taiwan Cement Corporation chair Zhang Anping said "Cement has created the civilised society we live in today, and Taiwan Cement Corporation will continue to participate in energy transformation and support the development of future civilisation. This cooperation with Polysius, a golden brand in the cement industry, is to solve the problem of greenhouse gas emissions, creating the future not only for the cement industry but for the whole world."

US: Mexico-based GCC has hired ThyssenKrupp Polysius North America to build a 3000t/day clinker production line at its Odessa plant in Texas. When commissioned in late 2025, the line is expected to more than double the plant’s clinker capacity to 2Mt/yr across three kilns. The supplier says the project will also lower the plant’s annual CO₂ emissions by 13%.

GCC chief executive officer Enrique Escalante said "We remain strongly committed to delivering strong stakeholder value, while investing in the future growth of our business. With the expansion of the Odessa plant, we will ensure GCC is prepared for a new phase of the industry cycle."

Germany: ThyssenKrupp has reorganised its cement engineering subsidiary ThyssenKrupp Polysius from the start of October 2023 as part of its new Decarbon Technologies segment. The new division also includes bearings and drive company Rothe Erde, chemical plant supplier Uhde and electrochemical plant supplier ThyssenKrupp Nucera. In its annual report for 2022 – 2023 the group said it had formed the new segment because “we want to systematically access the enormous potential of the green transformation and translate it into value-creating growth.”

The group’s Multi Tracks segment, which ThyssenKrupp Polysius was part of previously, reported growth of 16% on a comparable basis to Euro3.17bn in the year to the end of September 2023 compared to Euro4.10bn in the same period ending in 2022. However its order intake fell by 16% to Euro3.74bn and it reported a negative adjusted earnings before interest and taxation (EBIT) of Euro132m. Overall the group’s order intake, sales and EBIT all fell in the reporting period.

Miguel López, the chief executive officer of ThyssenKrupp said “The figures show that we have made progress with the transformation of ThyssenKrupp, despite the difficult environment, but also that we must continue to work hard at raising the performance of our businesses. We have therefore launched our ‘APEX’ program to speed up improvements to our businesses’ performance. At the same time, we are systematically focusing our businesses on future areas in order to leverage our full potential there, especially in connection with the enormous opportunities that the decarbonisation of industry offers us. We are positioning ThyssenKrupp as an enabler of the green transformation, thereby supporting the transformation of many industries worldwide.”

Ghana: CIMPOR has appointed Germany-based ThyssenKrupp Polysius to build a 1280t/day flash activator for clay. The activator will supply calcined clay for use in the production of cement with a clinker factor as low as 50%. This can reduce the cement’s CO₂ emissions by 40% compared with ordinary Portland cement (OPC). The supplier’s contract covers engineering, supply of core equipment and supervision of the project. The equipment includes parts for clay handling, a hammer mill, a flash dryer and preheating and cooling equipment, as well as storage silos. The activator will be natural gas-fired.

Polysius Activated Clay product owner Leo Fit said "Our technology is not only more environmentally friendly, but also creates cost benefits for our customers like CIMPOR. In many regions, limestone is scarce and clinker has to be imported at high cost. At the same time, suitable clay sources are available. The increasing pressure to reduce greenhouse gas emissions is leading cement manufacturers to rethink. They need an alternative that is cost-efficient and at the same time provides high-quality cement. This is exactly what Polysius activated clay offers."

US: GCC has ordered pyroprocessing equipment from ThyssenKrupp Polysius for the expansion of its Odessa cement plant in Texas. The upgrade will more than double the plant’s capacity to 1.9Mt/yr, and reduce its CO₂ emissions by 13%. Contractor H&M Construction says that the project will be the third on which it has collaborated on design and construction.

H&M Vice President Casey Rushing said “H&M is proud to have the opportunity to serve GCC as its design-builder on this great project. H&M has a very strong active presence in Texas and a very strong veteran self-perform team that has recently completed with Polysius a near identical pyroprocessing expansion in the Southeast US. We intend to improve on our successes from our previous pyroprocessing lines by executing this project for GCC with superior safety, quality and customer satisfaction.”

US: ThyssenKrupp Polysius, a subsidiary of Germany-based thyssenkrupp, has delivered a Polysius booster mill to Mountain Cement's Laramie grinding plant in Wyoming. The Eagle Materials subsidiary will take delivery of further ancillary equipment, including material handling, process gas management and machine protection systems, throughout mid-late 2023. The supplier said that the mill will help to increase the Laramie plant's flexibility. It will also provide site services and technical support for optimisation and maintenance for two years after commissioning, also slated for 2023.

ThyssenKrupp Polysius' project manager Matthew Burchfield said "This is a very important and interesting project for ThyssenKrupp Polysius. This is the first booster mill system sold in the US and one of the first booster mills worldwide. We are tasked with a very tight engineering and supply schedule. ThyssenKrupp Polysius is working closely with Mountain Cement and its engineering teams."