Displaying items by tag: Sinoma

Interesting move from HeidelbergCement this week with the news that it has agreed to buy a cement plant in Tanzania. The Germany-based multinational producer has signed a deal to buy a 68% stake in Tanga Cement from South Africa-based AfriSam. There has been no indication of the price but the arrangement will give HeidelbergCement a 1.3Mt/yr integrated plant in the north of the country along with a limestone quarry with reserves to last 30 years. The transaction is expected to close in the second quarter of 2022. HeidelbergCement says it then hopes to buy the remaining shares in the company.

HeidelbergCement already operates one integrated plant in Tanzania, Tanzania Portland Cement’s (TPC) Wazo Hill Plant in the capital Dar es Salaam. It took control of the plant in the early 2000s when its subsidiary Scancem International purchased over half of the company’s shares. The plant commissioned a new cement mill in 2014 to increase its production capacity to 2Mt/yr. Local press reported in April 2021 that the subsidiary planned to invest US$15m towards modernising the unit in 2021. It sells cement under the Twiga brand.

Tanga Cement runs a plant near Tanga that was originally commissioned in 1980. Holcim took it over in the mid-1990s before South-Africa based AfriSam assumed control in the early 2010s. The plant commissioned a second production line in 2016 and it has a production capacity of 1.3Mt/yr. It sells cement under the Simba brand.

HeidelbergCement’s decision to buy a plant in Tanzania is noteworthy because it goes against the general trend in acquisitions by western-based multinational cement companies in recent years. Instead of shrinking away from markets in developing economies and doubling-down on ‘safe havens’ in mature markets it has bought a plant in a developing country. Although one might argue that it does fit the definition of a well-chosen bolt-on acquisition.

Graph 1: Cement production in Tanzania, 2011 – 2020. Source: Tanzania National Bureau of Statistics.

As Graph 1 above shows, cement production in Tanzania has more than doubled over the last decade, from 2.4Mt in 2011 to 6.5Mt in 2020. Tanzania Portland Cement estimated local demand at 5.9Mt, including exports, in 2020. This was against a total cement production capacity, from both integrated and grinding plants, of 11Mt/yr. As well as the TPC and Tanga Cement plants mentioned above, Holcim runs an integrated plant in Mbeya and Huaxin Cement operates one near Tanga. Alongside this, new integrated plants have opened including Lake Cement’s 0.5Mt/yr Kimbiji plant in 2014 and Dangote Cement’s 3Mt/yr Mtwara plant in 2015. The big project on the horizon is a proposed 7Mt/yr integrated plant from China-based CNBM/Sinoma, although not much has been heard publicly about it since mid-2020. At that time local press was reporting that compensation was being finalised for residents of the proposed site near Tanga. Needless to say, given the size of the plant compared to the Tanzanian cement market, much of the plant’s output is intended for export.

With the CNBM plant in mind, it is noteworthy that HeidelbergCement committed to buying an extra plant in the country. Production has been going up over the last decade to presumably meet demand but the new Chinese project could potentially blot out the entire existing production. Tanzania faced a cement shortage at the end of 2020 despite coronavirus. TPC has repeatedly warned of production overcapacity in Tanzania and the challenges of competition. Yet it reported a new sales record in 2020 and growth of 7% in the national cement market. Despite a 5Mt overcapacity, TPC says it managed to adapt to the new market conditions. It also managed to grow its operating profit by 20% year-on-year to around US$46m in 2020 compared to HeidelbergCement Group’s 8% rise in results from current operations in 2020. This kind of return no doubt helped HeidelbergCement to make up its mind.

There have been a couple of news stories worth noting in the Turkish market this week. First, it was revealed that Medcem had chosen Sintek Group to build a new production line at its integrated plant in Mersin. Second, Çimko Çimento agreed to buy two integrated plants and a grinding plant from Çimsa.

The Medcem upgrade project will see the subsidiary of Eren Holding add a second production line, with a clinker capacity of 9000t/day. Sintek Group reportedly has agreed to do this for US$128m. This follows an announcement from Medcem in late May 2021 that it was intending to invest over US$200m towards increasing its plant’s overall production capacity to 6.5Mt/yr from 3.5Mt/yr. The plan at this point was to start construction work in August 2021 with eventual commissioning of the second line in the first quarter of 2023. In addition the cement producer said at the time that it was going to open a new terminal in the US shortly. This was intended to join the company’s existing grinding plants in Cameroon and Tunisia and terminals in Russia and Northern Cyprus. On a side note, Medcem likes to point out that the 11,500t/day clinker production capacity on its existing line at its plant is the biggest in Turkey and Europe.

The Çimko Çimento deal with Çimsa was for US$127m. It includes the Nigde Kayseri integrated plants, the Ankara grinding plant and seven ready-mix concrete plants. As would be expected, the transaction is subject to the approval of the local competition authority.

Graph 1: Domestic and export cement sales in Turkey, January – June 2017 – 2021. Source: Türk Çimento.

Graph 1 above gives an idea why some cement producers might have decided that it’s time to expand either through upgrades or acquisitions. The general Turkish economy suffered a jolt in mid-2018 when the value of the Turkish Lira dropped and interest rates rose. The coronavirus pandemic hit in 2020 but after a slowdown at the start of that year the economy managed to grow. The growth has continued so far in 2021 but inflation rates have also soared. In the cement sector, annual domestic sales fell consecutively from 2017 to 2019. They started to recover in 2020 and so far in 2021 it looks like they are continuing to grow. As domestic sales fell the sector focused on exports and they have grown steadily on an annual and half-year basis since 2018. Annual exports hit a high of 16Mt in 2020 or 23% of total sales.

Despite this, in June 2021 the Turkish Cement Manufacturers' Association, Türk Çimento, was warning that input costs were mounting, particularly in the last year. It reported that the price of petcoke had nearly tripled in this period. It also warned of mounting production overcapacity, estimated at over 20Mt/yr in 2019 although down to 7Mt/yr in 2020. Coupled with a fall in annual domestic sales from 2017 to 2019, in its words, “The contraction in domestic consumption during that period steered our companies toward exports.” Some of the larger cement producers, including Oyak, Akçansa and Çimsa all reported healthy rises year-on-year in revenue and operating profit in the first half of 2021. They also reported mounting costs which have risen by 35 – 80%.

The other recent stories from Turkey to note are a two week strike organised by the Building Contractors Confederation (IMKON) in September 2021 due to high costs, particularly cement. The confederation claimed that the price of cement had tripled over the last year. Earlier, in late April 2021, the Turkish competition authority Rekabat Kurumu launched a probe into alleged collusion by nine cement producers including Oyak, Çimsa and Limak. We are not saying these two stories are connected. The current state of the Turkish economy is more than enough to cause input costs for cement producers to spike. Yet headlines like this cannot be reassuring to builders wondering why the cost of cement is going up.

In summary, it’s an uncertain time for the Turkish cement industry. Sales are recovering but this has been achieved by pushing exports more than a rally at home. Alongside this, currency instability and high inflation rates are raising costs for cement producers and end-users. This hasn’t been enough though to stop growth activity from a couple of producers in the last week.

For more on the Turkish cement sector read ‘Cement in Turkey’ in the October 2021 issue of Global Cement Magazine

Philippines: Holcim Philippines plans to invest US$4.18m in upgrades to its cement plants at La Union, Bacnotan, and Lugait, Misamis Oriental to improve business and sustainability performance.

The subsidiary of Switzerland-based Holcim held a ceremonial signing ceremony on 7 July 2021 to award the contract to Sinoma CBMIPH Construction to install a drying facility at the La Union plant. The project is intended to reduce the fuel consumption of the unit by reusing hot gases from operations to dry materials. The integrated plant was recently awarded an ISO 45001:2018 for Occupational Health and Safety Management System and recertified for ISO 9001:2015 (Quality Management System) and ISO 14001:2015 (Environmental Management System) by certification body TÜV Rheinland. Holcim Philippines has also contracted Sinoma CBMIPH to install a drying facility at its Lugait plant that will reduce moisture of raw materials to improve grinding operations. The La Union and Lugait projects are scheduled to be completed in the first quarter of 2022 and by the end of October 2021 respectively.

In January 2021, Holcim Philippines also started projects worth US$2.42m to raise the efficiency of converting qualified waste materials to alternative fuels of its cement plant in Bulacan, Norzagaray. These will enable its Geocycle subsidiary to support the Bulacan plant to increase its thermal substitution rate by using more post-consumer and municipal solid wastes as alternative fuels.

Philippines: China-based Sinoma Construction will renovate Holcim Philippines’ La Union cement plant in Bacnotan, North Luzon. Seetao News has reported that the company signed a contract with the subsidiary of Switzerland-based Holcim in July 2021. The work involves a capacity expansion, renovation and de-bottlenecking. The aims of the projects are to promote the modular grinding station market and expand Holcim’s Philippines business and deepen its localisation.

Argentina: Loma Negra has ignited its new 2.7Mt/yr kiln line at the L’Amalí cement plant in Olavarría. The Clarín newspaper has reported that the new second line expands the plant’s capacity by 40%. The cost of its construction was US$350m.

Chief executive officer Sergio Faifman called the project’s completion a ‘milestone’ in the company’s history. He said, “I would like to thank everyone who was working on the site: Loma Negra employees, Sinoma and contracting companies. We have had and gone through economic and social difficulties and it is thanks to the efforts of all that we are here today. With effort and commitment, dedication and teamwork, you can go a long way.”

The latest piece of China-based Huaxin Cement’s global ambitions slotted into place this week with the news that it is preparing to buy plants in Zambia and Malawi. Its board of directors has approved plans to spend US$150m towards acquiring a 75% stake in Lafarge Zambia and US$10m on a 100% stake in Lafarge Cement Malawi. The move will gain it two integrated plants with a combined production capacity of 1.5Mt/yr in Zambia, and a 0.25Mt/yr grinding plant in Malawi.

This latest proposed acquisition represents the next step for Huaxin Cement in Africa following its purchase of African Tanzanian Maweni Limestone from ARM Cement in mid-2020. The company has also been busy along the more traditional Belt and Road Initiative land routes in Asia. It started up the kiln at its new 2Mt/yr Jizzakh cement plant in mid-2020. Elsewhere in Central Asia it runs two plants in Tajikistan and one plant in Kyrgyzstan via various indirectly-owned subsidiaries. While in South Asia it runs a plant in Nepal and in South-East Asia it runs one in Cambodia. If the plans in Zambia and Malawi pay off then it will give the Chinese producer a growing presence in East Africa, with plants in three countries.

The China Cement Association ranked Huaxin Cement as the country’s fifth largest clinker producer in 2021 with an integrated capacity base of just under 63Mt/yr. Domestically, the company operates 57 cement plants and most of these are based in the Yangtze River Economic Belt region. In 2020 it reported cement and clinker sales of 76Mt, a small decrease from 2019. Its operating income fell by 6.6% year-on-year to US$4.58bn and profit dropped by 12% to US$1.2bn. This performance was blamed on the emergence of Covid-19 at the start of 2020 and then floods later in the year.

Compared to the other larger Chinese cement producers, Huaxin Cement roughly appears to be holding rank with its overseas expansions. The leaders, CNBM and Anhui Conch, hold subsidiaries with plants in South-East and Central Asia and CNBM’s engineering wing, Sinoma, has a far bigger reach, building plants all over the place. Information has been scarce since mid-2020 on the long heralded 7Mt/yr plant in Tanzania due to be built by Sinoma and local subsidiary Hengya Cement. At that time local residents in Mtimbwani, Mkinga District were reportedly being compensated for their land. Other than this, one of the other big players internationally is Taiwan Cement. In 2018 it invested around US$1.1bn for a 40% stake in Turkey-based Oyak Cement. As well as a presence in Turkey this also gave it a share of plants in Portugal in 2019 when Oyak completed its acquisition of Cimpor.

Elsewhere this week, carrying some of the themes above with expansion in Central Asia, two new integrated cement plant projects were announced in Kyrgyzstan and Turkmenistan respectively. Meanwhile, Italcementi said it will invest Euro5.0m to restart clinker production at its Trentino cement plant in Sarche di Madruzzo, Italy. The unit has been operating as a grinding plant since 2015. This might be viewed as an unexpected decision considering the high local CO2 price but it shows some level of confidence in the local market by Italcementi and its parent company, HeidelbergCement. The next step will be when or if a European producer decides to build a brand new integrated plant in Italy or elsewhere.

Pakistan: Lucky Cement and China-based China Sinoma Energy Conservation have signed a deal to upgrade the waste heat recovery (WHR) units on both production lines at the integrated Pezu cement plant. When the project is completed it will increase the output to 14MW from 10MW at present. No value for the order has been disclosed. Sinoma supplied the plant’s original WHR units in 2017.

Senegal: China-based Sinoma Group subsidiary CBMI Construction has awarded a contract to Denmark-based FLSmidth for the supply of three control systems for one new and two existing lines at the Kirène cement plant in Thiès region. The lines will share a digital infrastructure built on the FLSmidth ECS/ControlCenter platform with ECS/PlantDataManagement software. Additionally, the supplier will equip the new Line 3 with its ECS/CemScanner and QCX/BlendExpert. It said that the setup will use 12,000 data points on Line 3 alone.

Group digital general manager Jens Adler said, “With more than 1500 active product and process control installations in the cement industry, this order reaffirms our strong digital expertise.” He added “Digitalisation is transforming how many in the cement industry respond to increasing demands for emission reductions and efficiency. This is reflected in the emphasis on digital solutions as part of our MissionZero ambition to offer cement producers zero emission cement production by 2030.”

Oman: Raysut Cement has held a groundbreaking ceremony for a new 9MW waste heat recovery (WHR) unit at its Salalah cement plant. The Times of Oman newspaper has reported that China-based Sinoma Overseas Development will undertake the engineering, procurement and construction work on the project.

The producer said that the installation “Will contribute significantly to our ambitious targets such as reducing power consumption by 25 - 30%, reducing CO₂ emissions and above all reducing in water consumption by more than 50%.”

Nigeria: China-based Sinoma CBMI Construction has signed an agreement with BUA Cement to build three 3Mt/yr plants in Adamawa, Edo and Sokoto states respectively. When completed by the end of 2022, the projects will bring the producer’s installed capacity to 20Mt/yr, according to the Vanguard newspaper.

The deal is Nigeria’s largest ever single contract for the construction of cement plants. the project will cost US$1.05bn.