Displaying items by tag: Engie

UAE: Holcim subsidiary Lafarge Emirates Cement (LEC) has begun construction of a 10MW waste heat recovery (WHR) plant at its 3.2Mt/yr Fujairah cement plant. Supplier Engie Solutions says that it expects to commission the installation later in 2023. Trade Arabia News has reported that the equipment is based on a closed-loop organic Rankine cycle and will eliminate 29,000t/yr of CO₂ - 28% of the Fujairah cement plant's energy-related CO₂ emissions.

LEC general manager Olivier Milhaud said "Engie’s energy-as-a-service model means guaranteed energy savings and higher reliability and resilience, with no capital outlay and no need for additional staff." He continued "We are fully committed to the UAE’s sustainability goals, including the 2050 Net Zero vision."

Switzerland/France: Holcim is collaborating with Engie and and the French National Institute of Applied Sciences (INSA) Lyon to develop a cement-based energy storage technology to serve as an alternative to batteries. The solution will use cement hydration to store heat as energy and release it when needed in an infinitely repeatable cycle. The partners say that it will make energy storage local, safe, affordable and recyclable.

Holcim’s head of global innovation Edelio Bermejo said "The world needs innovative solutions to accelerate our shift towards renewable energy generation, distribution and storage – all areas in which Holcim can play a big part. With this collaboration, we are moving energy storage forward, opening up a new range of solutions based on materials that are local and recyclable."

UK: Cemex UK, part of Mexico-based Cemex, has renewed its 100% renewable electricity supply contract with France-based Engie until mid-2024. The supply will cover nearly 200 of its UK sites including its integrated cement plant at Rugby and its grinding plant at Tilbury.

Cemex’s Europe regional head of carbon, legacy landfill and special projects Martin Hills said, “Cemex has a dedicated Climate Action Plan for its global operations which outlines the company’s vision to advance towards a carbon-neutral economy and to address society’s increasing demands more efficiently. The use of renewable electricity at our sites plays an important part in this and we are pleased to have renewed our partnership with Engie for a further three years.

Belgium: Carmeuse has signed a joint development agreement with France-based energy transition specialist ENGIE and John Cockerill for a carbon capture and utilisation (CCU) project in Wallonia. It will concentrate CO₂ from a new type of lime kiln and combine it with ‘green’ hydrogen to produce ‘e-methane.’ The hydrogen will be produced by a 75MW electrolyser plant powered by renewable electricity. The company said, “The produced e-methane will be suitable for injection into the national natural gas grid. This renewable e-methane can be used by industrial users or as an alternative fuel in the transport sector, thus allowing these sectors to decarbonise.”

Construction is due to begin in 2022 for commissioning of the installation in 2025. Its total investment cost is Euro150m. The partners have applied for funding from the EU Innovation Fund and Important Project of Common European Interest (IPCEI) fund. The project’s estimated CO₂ emissions reduction over 10 years is 900,000t

Chief executive officer (CEO) Rodolphe Collinet said, “We are delighted to join forces with John Cockerill and ENGIE for the development of this very exciting and strategic project. It is a major step forward in our ambition to become CO₂-neutral by 2050. This project is a very concrete and important example of Carmeuse’s strong commitment and contribution to sustainable development.”

Europe: Australia-based Calix has announced that construction will begin on its second low emissions intensity lime and cement (Leilac) carbon capture and storage (CCS) installation at a ‘European cement plant’ on 7 April 2020. ASX ComNews has reported that collaborators on the project, which has received Euro16m under the EU’s Horizon 2020 grant scheme, are Portugal-based Cimpor, Germany-based HeidelbergCement, Germany and France-based energy companies Ingenieurbüro-Kühlerbau-Neustadt (IKN) and Engie and Belgium-based minerals and lime company Lhoist. Calix has said that the 100,000t/yr process emissions capture facility will be operational in late 2024.
The company has appointed Emma Bowring Leilac-2 project leader.

The first Leilac installation was completed at HeidelbergCement’s 1.5Mt/yr integrated Lixhe plant in Belgium’s Limburg province in mid-2019.

UK: Cemex says that it will use 100% renewable electricity at supplied sites in a partnership with energy, services and regeneration group Engie. Engie has been providing electricity to over 150 Cemex UK sites for over 10 years, also supplying gas to 33 of these sites. The current contract is to be extended for a further 12 months. All of the electricity supplied to the sites will be from 100% renewable energy sources including wind energy.

“Cement manufacture is inherently energy-intensive and we work hard to minimise energy consumption within the process constraints. The switch to electricity from renewable sources is playing a key role in our carbon reduction strategy,” said Martin Hills, Head of Energy and Carbon at Cemex in the UK.

Cemex is also using Engie’s demand side services, such as load management to avoid peak tariffs and rapid frequency response, which generates extra revenue for Cemex UK. Engie manages all contractual requirements with National Grid on Cemex UK’s behalf.

Chile: Cementos Bicentenario (BSA) has signed a deal with energy company Engie to supply its Quilicura grinding plant near Santiago with renewable energy. All of the energy supplied to the plant will come from renewable sources including solar and hydroelectric. The contract, equivalent to 35GWh, will see the plant achieve the I-REC certification.