Displaying items by tag: US

US: ScrapeTec has announced the launch of PrimeTracker, a belt tracker designed to tackle misalignment. The supplier says that the tracker differs from other products of its kind in using free rotation, thereby avoiding abrasion and damage from sliding over the belt surface. The tracker is able to swing and tilt while remaining in full contact with the belt.

Sales and distribution head Thorsten Koth said, “For optimum performance of a conveyor system, it is critical that the belt always runs straight on the conveyor, without sideways movement. Our new PrimeTracker belt tracker has been designed to automatically guide a conveyor belt back into the correct straight-line position, to prevent costly downtime and component replacement.” He added, “An advantage of the ScrapeTec PrimeTracker is that it is operates in the idling position at all times, unless there is sideways movement of the belt. This system corrects misalignment immediately, by guiding the belt back into the correct position, with no damage or abrasion to the belt or tracker.”

Greece: Titan Cement’s consolidated earnings before interest, taxation, depreciation and amortisation (EBITDA) rose by 7% year-on-year to Euro286m from Euro267m in 2019. Sales remained level year-on-year at Euro1.61bn and net profit after taxes and minorities (NPAT) fell by 97% to Euro1.50m from Euro50.9m. The group attributed the profit slump to one-off charges, namely the full write-off of the Euro46.6m goodwill of subsidiary Titan Cement Egypt and the derecognition of Euro17.3m of accumulated deferred Egyptian tax assets. If not for these, the group says its consolidated NPAT would have increased by 28% to Euro65.4m.

Cement sales were 17.1Mt, up by 1% from 17.0Mt. The group called the impacts of the coronavirus outbreak ‘less severe than expected.’ Ready-mixed concrete sales rose by 3% to 5.4Mm³ from 5.2Mm³.

Construction activity continued under coronavirus lockdown in most of the group’s countries of operation. As a result, sales remained resilient across all markets. US sales fell by 2% to Euro938m from Euro952m due to negative currency exchange effects. Greece and Western Europe sales rose by 1% to Euro247m from Euro245m. Southeastern Europe sales rose by 3% to Euro938m from Euro952m and Eastern Mediterranean sales rose by 1% to Euro152m from Euro150m.

Group executive committee chair Dimitri Papalexopoulos said “In 2020, we delivered strong financial performance while taking care of our employees and those around us, ensuring high-quality, uninterrupted customer service and accelerating progress towards our digital and sustainability aspirations. In the face of uncertainty caused by Covid-19, we remained confident in our business model. We adapted to shifting market conditions and continued to pursue operational excellence while laying the groundwork to capture future growth.” The group anticipates a positive market trend in all regions in 2021.

US: R-Tec Creations has launched New World Concrete, a single-stone Portland pozzolan concrete. R-Tec creations classifies the product as super ultra high performance concrete (SUHPC) for its compressive strength. It developed the concrete for use in construction in hurricane and earthquake-affected areas.

US: Lehigh Hanson has signed a collaboration agreement with materials technology company Fortera. Under the agreement, the companies will establish a carbon capture and storage (CCS) system at the producer’s 0.8Mt/yr integrated Redding Cement plant in Shasta district, California. The system will produce a cementitious material for use in concrete production. The material will be the first of its kind to be produced at a cement plant.

"This collaboration with Lehigh Hanson will prove the commercial scalability, the quality of the final product, and the competitive economics of the Fortera process," said Ryan Gilliam, chief executive officer and co-founder of Fortera. He added that the Fortera process (ReCarb) has been designed to utilise the existing cement infrastructure, from the quarry to the kiln, but with less CO₂ emissions, lower energy, and lower processing temperatures, leading to 60% lower CO₂ emissions per tonne of product.

US: The Market Intelligence Group at the Portland Cement Association (PCA) has made an additional update to its Winter 2020 – 2021 economic forecast. Senior vice president and chief economist Ed Sullivan revised the association’s assessments regarding the path of Covid-19, vaccine supply, government Covid-19 relief and inflationary pressures.

The association said that it expects domestic cement consumption to grow by nearly 1% in 2021, fuelled largely by residential construction. It estimated ‘weak’ non-residential construction performance, with soft economic activity affecting government funds at federal state level. It added that the new federal government Covid-19 relief targeting state government would likely limit public cement’s drag on 2021 cement consumption growth.

US: Kespry says that Cemex USA is using its drone and software product for stockpile management at its operations. A Cemex representative said that it has mapped 74,500ha of land over more than 4000 drone missions using Kespry’s product. The supplier uses autonomous aerial drones to gather survey data and then uses machine learning techniques to analyse the results.

Director of aggregate resources Matt Lewis said, “Kespry plays a critical role at both our cement and aggregates sites, despite operations being significantly different. Since initially adopting Kespry, we have been able to measure 21,100 stockpiles across our aggregates sites, while also collecting massive amounts of topographic data into the Kespry Cloud across our cement sites. The amount of time and money the Kespry platform has saved us is unmatched, and we wouldn’t be able to operate at this level if it weren’t for Kespry.”

US: Data from the US Geological Survey (USGS) shows that cement producers achieved volumes of 87Mt of Portland cement in 2020, a slight increase from 2019 levels. Portland and masonry cement volumes rose by 1% year-on-year to 89Mt from 88Mt, while clinker volumes remained level at 79Mt. Total cement shipments remained level at 103Mt. The value of shipments in 2020 was US$12.7bn. Total exports of cement and clinker were 1.0Mt, down from slightly over 1.0Mt in 2019. The USGS said that on-going upgrades, closed and mothballed plants, low capacity utilisation and relatively inexpensive imports constrained the industry’s growth.

Domestic consumption fell by less than 1% to 102Mt from 103Mt. Cement imports totalled 15.0Mt, up slightly from 14.7Mt, while clinker imports rose to 1.4Mt from 1.2Mt. This corresponded to a 15% rise in reliance on imports of cement and clinker. The main exporters of cement and clinker to the country were Canada, accounting for 33% of US imports, Turkey (16%), Greece (15%) and China (12%).

Ireland: CRH’s consolidated earnings before interest, taxation, depreciation and amortisation (EBITDA) grew by 5% year-on-year on a like-for-like basis to US$4.6bn in 2020 from US$4.5bn in 2019. Sales fell by 2% to US$27.6bn from US$28.1bn. The group reported a net debt/EBITDA ratio of 1.3x, its lowest since 2010.

Chief executive officer Albert Manifold said, "Our 2020 performance is testament to the commitment of our people and the strength and resilience of our business model. Through the repositioning of our business in recent years and our relentless focus on continuous business improvement, we have delivered record levels of profitability, margins and cash generation. Although the near-term outlook remains uncertain, our unique portfolio of businesses together with the strength of our balance sheet leaves us well positioned to capitalise on the growth opportunities that lie ahead."

By division the group reported growth in its US cement sales volumes in 2020 on a like-for-like basis due to demand in the west, surpassing the negative effects of the coronavirus pandemic elsewhere. However, volumes fell in Canada, particularly in the first half of the year. In 2020, CRH adopted the Ash Grove brand for all its North American cement businesses, unifying 12 cement plants and 42 cement terminals under one brand. In Europe sales and earnings fell due to poor markets in the west despite better conditions on the east. The group noted that it grew its profit in the Philippines due to a strong recovery in the second half and cost savings despite plant shutdowns.

US: Germany-based HeidelbergCement subsidiary Lehigh Cement has taken legal action against the Santa Clara county planning and development director over processing delays to the company’s planning applications. The Los Altos Town Crier newspaper has reported that the producer plans to fill in an open-pit aggregates mine, to open a second mine and to cut through a natural ridge near to its integrated Permanente cement plant near Cupertino in California. The plans constitute an amendment to a plan previously approved in 2012 .

The company says that it has ‘exhausted available administrative remedies’ against the local government office. It said that the rights it seeks to exercise are not subject to permits. It added that the director deemed the application complete in 2019, before requiring additional processing steps.

US: Charah Solutions will sell and market production fly ash from NV Energy’s North Valmy coal-fired power plant in Valmy, Nevada under a contract with the power producer. The contract runs until 2025. The company will distribute the ash through its 40-location nationwide MultiSource materials network as supplementary cementitious material (SCM) for cement and concrete production.

President and chief executive officer Scott Sewell said, “We are delighted to partner with NV Energy to manage their fly ash marketing needs at Valmy, while supplying our concrete producers with the high-quality material they need.”