30 September 2020

Togo: Cimenterie de Côte Ouest-Africaine (CimCo) says that it has hired Germany-based Intercem Engineering and Gebr. Pfeiffer for the supply and installation of a 2.5Mt/yr-capacity integrated cement plant in Lomé, Maritime Region. Togo First News has reported that the company has secured a US$35.8m loan from Banque Ouest Africaine de Développement (BOAD) towards construction of the US$179m plant.

CimCo said, “The targeted goal is to contribute to the satisfaction of cement demand in Togo and the region by taking advantage of the geographic location of the port of Lomé, as well as to contribute to the country's economic growth by boosting the competitiveness of the industrial sector along with performances of the infrastructure sector.”

Democratic Republic of Congo: The government of Tanganyika Province has announced the start of construction of a 2.0Mt/yr-capacity integrated cement plant in Kabimba. The Financiel Afric newspaper has reported that the plant will occupy the site of the former Kabimba cement plant, which was mothballed in 2016.

Governor Zoé Kabila Mwanza Mbala said, “The revival of the Kabimba cement plant will revitalize the social sector and restore the economic fabric throughout Tanganyika Province.

Uzbekistan: Karauzak Cement has signed a contract for China-based Tianjin Cement Industry Design and Research Institute (Sinoma TCDRI) to supply a 1.6Mt/yr clinker plant for US$273m. The scope of supply includes a full production line from raw material crushing to shipping finished cement. The project will be located in Nukus District in Karakalpakstan. Commissioning is expected within about two years after advance payment is received.

Pakistan: Maple Leaf Cement plans to expand the waste heat recovery (WHR) unit to 25MW at its integrated Iskanderabad plant. The project is scheduled for completion in September 2021. It has a projected budget of around US$11m.

Philippines: The Department of Trade and Industry says that it is considering banning Bureau of Philippines Standards-certified companies’ cement from bearing the label ‘Made in the Philippines’ where it was produced in another country. The Cement Manufacturers Association of the Philippines has complained that the labels constitute false advertising.

Trade Secretary Ramon Lopez said that any regulative action would follow a thorough review, but “offhand, if products are not really manufactured here, they cannot be labelled as ‘Made in the Philippines.’”

Japan: Sumitomo Osaka Cement says that independent tests have confirmed that the radioactivity levels of cement produced at its 0.9Mt/yr Tochigi plant in Sano, Tochigi Prefecture are “below the lowest detectable limit,” meaning that the product is safe. The company said, “We hope that you will continue to use our products with peace of mind.”

Production at the plant was disrupted in 2011 when it was discovered that it was co-processing sewage sludge sourced from near the Fukushima Daiichi Nuclear Power Plant in Ōkuma, Fukushima Prefecture. The power plant suffered a nuclear meltdown following the Tōhoku earthquake and tsunami in 2011 that led to widespread radioactive fallout.

Mexico: The board of directors of Cemento Cruz Azul has asserted legal control of its Cementos y Concretos Nacionales (CYCNA) subsidiary cement plants in Puebla and Aguascalientes following accusations of ‘looting’ by partners in the company. In a video statement José Antonio Marín, president of the board of directors, said that the move would give the producer greater control over its operations since all cement would be registered in an internal audit programme, according to the Milenio newspaper. He alleged that some partners of the company had sold cement manufactured at the units independently.

José Antonio Cárdenas has been appointed manager of the CYCNA plants to replace Benito Rodríguez Fayad. Fayad allegedly had links to Cruz Azul’s former director Guillermo ‘Billy’ Álvarez, a former director of the company who is currently being investigated by law enforcement for links to organised crime and money laundering.

Mexico: Cemex says that Carbon Trust has validated its roadmap to decarbonise global operations in line with the Sectoral Decarbonisation Approach (SDA) 2-degree scenario (2DS) developed by the International Energy Agency (IEA). The validated roadmap is intended to help the company to achieve a 35% reduction of net carbon emissions by 2030. The findings validate Cemex's roadmap for reducing Scope 1 and 2 emissions.

The Carbon Trust has assessed the technical feasibility of the plan based on guidelines defined by international institutions including the International Energy Agency, the Cement Sustainability Initiative, and the European Climate Research Alliance. The CO₂ reduction methods include the use of alternative fuels, using decarbonated raw materials, renewable power projects, and novel cements, among others. The validation also included a review of Cemex's commitment to implement the scheme based on governance mechanisms and business planning.

“The magnitude and complexity of change required by a company such as Cemex to decarbonise its global operations is significant. Our assessment provides the organization’s management, investors and stakeholders with an independent validation that its commitments are backed up by sound assumptions and planning,” said Aleyn Smith-Gillespie, Associate Director Advisory at the Carbon Trust.

Austria: Waste processing specialist Lindner has celebrated the groundbreaking ceremony for its new headquarters. The company says that the 45,000m² site will also encompass a new “state-of-the-art waste processing technology production plant.” It says that the facility will enable it to better serve the industries that depend on its expertise, including the cement sector. “That’s why it is so important to us to constantly expand this know-how, develop new solutions and systematically prepare and pass on the knowledge gained,” it added.

Germany: HeidelbergCement says that it has supplied concrete for the construction of an 80m² two-storey detached house in Beckum, North Rhine-Westphalia. The concrete contains i.tech 3D, a ground sulphoaluminate clinker developed by HeidelbergCement subsidiary Italcementi for use as an additive in concrete for 3D printing. Engineering & Innovation head Jennifer Scheydt said, “The development of a cement-bound material for 3D printing is a major challenge. It should be easy to pump and extrude. It must also quickly develop sufficient load-bearing capacity so that the lower layers do not give out under the load of the upper layers. At the same time, the bond between the layers must be ensured.”

The property, the first of its kind, will consist of three-shelled insulation-filled walls when completed in late 2020.