
Displaying items by tag: control system
Canada: Lafarge Canada has selected ABB to update the process control system at its Bath cement plant in Kingston, Ontario. ABB will supply, commission and support its ABB Ability System 800xA distributed control system, which aims to enhance plant process visibility and control. The Bath plant produces over 1Mt/yr of OneCem low-carbon cement and is the site of a pilot carbon capture project.
Andrew Stewart, vice president of cement at Lafarge Canada, said "We are dedicated to advancing sustainable construction, not least through rigorous decarbonisation efforts. From working with ABB to upgrade our process control system, to integrating low-carbon fuels and upgrading to energy-efficient kiln technology, we are significantly leading the way in sustainable construction by reducing our carbon emissions per tonne of cement produced. For example, our pilot carbon capture initiative with Hyperion has also been critical, as it leverages innovative processes to capture and sequester CO₂, bringing us closer to our goal of net-zero emissions."
France: Ciments Calcia has announced an investment of Euro86m to further decarbonise cement production at its integrated Beaucaire plant. The subsidiary of Germany-based Heidelberg Materials has allocated a total of Euro600m towards reducing CO2 emissions from all of its operations in the country in response to a government initiative, according to The Tribune newspaper.
The current funding follows a spend of just under Euro7m on upgrades at the site, including installing a new clinker cooler that will allow for greater recovery of waste heat, and the addition of a new computer control system. Following this work, the single production line plant was restarted in early April 2023.
The next stage of investment has started with a feasibility study. If successful, a tendering process could start in the second half of 2023 with work planned to start in 2025. The company intends to renovate the plant’s electricity network, modernise the production line with a preheater and a pre-crusher and make further changes to target an alternative fuels thermal substitution rate of 75%. A third stage, involving carbon capture and utilisation and/or storage, is tentatively planned to start in 2030.
UAE: Switzerland-based ABB has carried out an upgrade of the control system for UltraTech Cement subsidiary Star Super Cement at the company's Dubai grinding plant. The supplier says that it installed its ABB Ability 800xA distributed control system (DCS) across three grinding units at the facility. The DCS will communicate between the plant and the company's Ras Al Khaimah clinker plant. ABB previously supplied electric and automation engineering services for the Ras Al Khaimah plant in 2012.
ABB Process Industries global cement lead Max Tschurtschenthaler said that Star Cement's operations will benefit from improved operator visibility, easier maintenance and reduced downtime due to the new systems.
FLSmidth to supply control systems for three production lines at Kirène cement plant in Senegal
15 April 2021Senegal: China-based Sinoma Group subsidiary CBMI Construction has awarded a contract to Denmark-based FLSmidth for the supply of three control systems for one new and two existing lines at the Kirène cement plant in Thiès region. The lines will share a digital infrastructure built on the FLSmidth ECS/ControlCenter platform with ECS/PlantDataManagement software. Additionally, the supplier will equip the new Line 3 with its ECS/CemScanner and QCX/BlendExpert. It said that the setup will use 12,000 data points on Line 3 alone.
Group digital general manager Jens Adler said, “With more than 1500 active product and process control installations in the cement industry, this order reaffirms our strong digital expertise.” He added “Digitalisation is transforming how many in the cement industry respond to increasing demands for emission reductions and efficiency. This is reflected in the emphasis on digital solutions as part of our MissionZero ambition to offer cement producers zero emission cement production by 2030.”
ABB integrates Oman Cement Company’s Muscat plant’s three lines in single digital control system
02 February 2021Oman: Switzerland-based ABB has completed a digital systems overhaul at Oman Cement Company’s (OCC) Muscat cement plant. The supplier says that by integrating the plant’s three production lines with its ABB Ability System 800xA product it will optimise performance across the lines, boosting operational efficiency, increasing availability, lowering costs and driving sustainability. It says that it has also replaced older controllers in their final lifecycle phase with AC800M models. Teams from OCC and ABB collaborated to complete the engineering, supply, installation and commissioning of the ABB systems.
OCC head of instrumentation and control Bashar Al Farsi said, “Cement production is a core industry for Oman, serving and enabling a self-sufficient construction industry. With the long-term support of ABB we have added to this strength and look forward to continued success, now with the latest digital control system across our three process lines. We have already identified time and cost savings, and will drive towards greater efficiencies and sustainability targets as we aim to be the number one cement manufacturing company in the Sultanate.”
OCC has been a customer of ABB since 1978.
Steffen Haack appointed as executive board member responsible for engineering at Bosch Rexroth
20 January 2021Germany: Bosch Rexroth has appointed Steffen Haack as its executive board. His tasks include the engineering activities of the company and responsibility for the three business units which constitute the Industrial Hydraulics division. Haack will retain his role as head of the Industrial Hydraulics business unit. He succeeds Heiner Lang as head of Engineering, who left the company at the end of 2020.
Haack, aged 54 years, holds a doctorate degree in fluid technology and he began his career at Bosch in 1996. Since 2017, he has been managing the Industrial Hydraulics business unit, for which he will continue to remain responsible. He was previously a member of the executive board of Bosch Rexroth from 2015 to 2017. In addition to his professional activities, Haack is a member of the executive board of the Fluid Technology Association at the Mechanical Engineering Industry Association (VDMA) and the advisory board of the German Mechanical Engineering Summit.
Other appointments include the decision to place executive board member Marc Wucherer in charge of the Factory Automation division, another unit previously managed by Lang. Wucherer has been responsible for sales and for the three hydraulics business units Industrial Hydraulics, Large Hydraulic Drives, and Large Projects since 2017. Responsibility for these three hydraulics units will be transferred to Haack.
Germany-based Bosch Rexroth is a supplier of drive and control systems for many industries including cement, mining and materials handling.
Tan Thang Cement commissions control system package from ABB
30 October 2020Vietnam: Tan Thang Cement has commissioned a control system package supplied by Switzerland-based ABB for a new cement plant in Nghe An province. The order included an ABB Ability System 800xA DCS (Distributed Control System), which integrates control, electrical and communication systems, ABB Ability Knowledge Manager and ABB Ability Expert Optimizer products which are integrated with the DCS, and basic communication and electrical system infrastructure and equipment.
"This was a challenging project many years in development and we delivered the control system package within our customer's timeframe. We used remote support and provided all necessary training to ensure that the plant team could complete the commissioning accurately and safely," said Nguyen Hoang Giang, Division Manager for Process Industries, ABB Vietnam.
On the electrical side, ABB provided a 110kV air insulated substation, with a SCADA (Supervisory Control and Data Acquisition) system based on ABB Ability System 800xA for Power Control, as well as telecommunications, and high voltage primary and secondary equipment to support the electrical infrastructure. ABB also delivered power transformers, distribution transformers, a motor control centre, auxiliary control centre, emergency diesel generator, DC power supply, various field devices, and related commissioning services.