September 2024
Holcim Philippines board approves subsidiaries merger 24 November 2020
Philippines: LafargeHolcim subsidiary Holcim Philippines has announced plans to merge with its subsidiaries Bulkcem Philippine Incorporated and MabiniGrinding Mill Corporation. The Philippine Star newspaper has reported that the board has approved the planned merger, and that a special stockholders’ meeting will take place on 15 January 2021 to finalise the transactions.
Bulkcem Philippine Incorporated leases the Iloilo cement terminal in Western Visayas, while MabiniGrinding Mill Corporation leases the Mabini grinding plant in Calabarzon.
The board also approved the dissolution of Holcim’s Business Service Center, HuBB Stores and Services and British Virgin Islands-based WellBorne Group International.
Lafarge Zementwerke appoints A TEC for Mannersdorf cement plant alternative fuels Flash Dryer installation 24 November 2020
Austria: Loesche subsidiary A TEC has won a contract for the supply and installation of a Flash Dryer for alternative fuels (AFs) in the kiln line of Lafarge Zementwerke's 1.1Mt/yr Mannersdorf cement plant in Lower Austria. The supplier said that it will complete the project in early 2021.
The company said, “Reaching high thermal substitution rates (TSR) requires firing of alternative fuels at the kiln burner. To reach a stable sintering zone for the required clinker quality a high fuel quality (high LCV, small particle size) is needed, otherwise the clinker quality may suffer or the TSR can be limited. With the A TEC Flash Dryer various waste heat sources can be used (clinker cooler flue gas, bypass gas, preheater gas, etc.). The material is dosed to the hot gas flow in the flash dryer and transported with this gas flow, while the moisture is evaporated, to a cyclone and a subsequent filter where the fuel is separated from the gas flow and on-line fed to a kiln burner or a satellite burner. In addition to the drying the lifting effect of the gas can separate 3D impurities which contributes in a further increase of the fuel quality.”
Germany: Denmark-based COBOD has supplied its BOD2 3D construction printer to the site of the world’s first 3D printed commercial apartment building in Wallenhausen, Bavaria. COBOD partner PERI will use the product to print a 380m2 complex, consisting of five apartments across three stories.
General manager and founder of COBOD Henrik Lund-Nielsen said, “We are incredibly pleased, that we are beginning to see the fruits of the many 3D construction printers we have sold. The actual building projects have been delayed by the Coronavirus outbreak, but now they start to be revealed. This new German project is really a great milestone as the commercial nature of the building proves the competitiveness of the 3D construction printing technology for three floors buildings and apartment buildings. This, again, opens entirely new markets for our printers.”
Thang Long and Ha Long cement plants named for closure in 2030 23 November 2020
Vietnam: The government of Quang Ninh Province has ordered the closure of two cement plants in Ha Long, the 2.0Mt/yr Ha Long cement plant and 2.3Mt/yr Thang Long cement plant, to close in 2030. The Viet Nam News newspaper has reported that the closures aim to protect the local environment and nature as part of the city’s move towards becoming a tourism and service hub centred on Cua Luc Bay. In 2014 the provincial government advised the cement plants to stop expanding and relocate before 2030.
Semen Indonesia is triple winner at Nusantara Corporate Social Responsibility Awards 2020 23 November 2020
Indonesia: The La Tofi School of Corporate Social Responsibility (CSR) has named Semen Indonesia as the winner in three categories at the Nusantara CSR Awards 2020. Indonesia Government News has reported that the three categories are: Health and Economic Assistance for Emergency Management of Covid-19, Leaders Inspiring CSR Practices and Community Involvement in Handling Waste.
General manager of CSR Edy Saraya said that the Covid-19 outbreak requires “integrated countermeasures, including the involvement of all components of society.” He added, “Through the programme implemented, we hope to help prevent and control the spread of Covid-19 and to be able to accelerate the implementation of (health protocol) adaptation of new habits. Especially for those affected by the pandemic, it can improve the economy of the community and the environment around the operational area."
Cementos Portland Valderrivas Alcalá de Guadaíra cement plant celebrates Healthy Week 23 November 2020
Spain: Against a backdrop of the Covid-19 pandemic, staff at Cementos Portland Valderrivas’ Alcalá de Guadaíra cement plant spent the working week of 16 – 20 October engaged in workshops and attending talks as part of the plant’s second annual Healthy Week. Workshops including stretching and health-affective communication, while talks covered areas including balanced diets and quitting smoking. The company says that throughout the week staff competed to offer the Best Healthy Proposal, by developing “ideas to implement actions that reinforce safety within the plant facilities and improve the factory in the field of health.”
Police investigate death at Lafarge Canada Richmond cement plant 23 November 2020
Canada: The Royal Canadian Mounted Police’s serious crime unit has launched an investigation into the death of one person at Lafarge Canada’s Richmond, British Columbia integrated cement plant on 19 November 2020. The Vancouver Sun newspaper has reported that the incident caused the plant to be evacuated.
Spokesperson Jill Truscott said, "We are in shock and are extremely concerned about the impact to this individual's family and friends. Steps have been taken to protect all employees on site and the surrounding community."
WorkSafe British Columbia is conducting a separate investigation.
DB Group supplies Cemfree concrete to Environment Agency flood defence project in the UK 23 November 2020
UK: DB Group has supplied its Cemfree concrete product to a site in Birmingham, West Midlands for use by the Environment Agency in a flood defence project. It says that the agency will use the concrete “for kerb bedding and backing over several kilometres in conjunction with various recycled products in an effort to reduce the projects’ carbon footprint.” Cemfree is a low carbon concrete made using ground blast furnace slag (GGBS) and pulverised fly ash.
APCMA’s Karachi offices searched in pricing probe 20 November 2020
Pakistan: The Competition Commission of Pakistan (CCP) conducted a search and inspection of the Karachi offices of the All Pakistan Manufacturers Association (APCMA) on Thursday 19 November 2020. The search was carried out as part of an enquiry launched in May 2020 to investigate possible anti-competitive activities by cement producers. Two different CCP teams entered and searched the offices of the Chairman and Vice Chairman of APCMA and impounded relevant records.
The enquiry began based on the information gathered through various media reports and concerns expressed regarding a concurrent increase in cement prices across Pakistan, particularly during April 2020. The APCMA stands accused of orchestrating a price rise among producers.
The CCP previously searched and inspected the APCMA’s main offices in Lahore. That search allegedly led to the discovery of WhatsApp messages and emails that led investigators to believe there were grounds for further investigation.
LafargeHolcim and Batica building ‘Houses of Tomorrow’ 20 November 2020
Switzerland/France: Along with its partner Batica, LafargeHolcim is optimising the design of a low-carbon house, bringing together the latest innovations developed by the group's global research and development centre in Lyon, France.
Construction of the House of Tomorrow began at the end of October 2020 in Saint-Caprais-de-Bordeaux, Gironde. The materials used for its construction will have a CO2 footprint more than 40% lower than a traditional house, and an optimised energy performance. The integration of these innovations in the house has made it possible for such a property to remain financially accessible to buyers thanks to controlled costs.
To achieve low CO2 emissions performance, LafargeHolcim used its innovative cement and concrete products, all of which are available on the French market. Foundations were poured using ECOPact AA concrete, with emissions 80% lower than standard concrete. ECOPact A concrete, with CO2 emissions 50-70% lower than standard concrete, will be used for the compression slab of the VS floor (crawl space). Airium, an insulating mineral foam, will be used to insulate the walls. A very low density concrete – 40-300kg/m3 depending on the mix – Airium represents an environmentally friendly, healthy and affordable insulation solution. LafargeHolcim’s Agilia Chape Thermic fluid screed will be used to coat the under-floor heating elements.