September 2024
WHR project for Bartin Çimento 16 August 2018
Turkey: Shanghai Triumph Energy Conservation Engineering Co Ltd has won a waste heat recovery (WHR) project at Bartin Çimento from Turkey’s Sanko Holding, which operates the plant. It will have a recovery capacity of 5MW from the 3700t/day facility. The project will be carried out on an Engineering, Procurement and Construction (EPC) basis.
Shanghai Triumph plans to install two boilers and one power generation system. It will use two boilers from Mitsubishi Corporation, with the power generator likely to be sourced from Kubota Corporation.
LafargeHolcim Dunkirk plant receives Euro3.5m 16 August 2018
France: LafargeHolcim has announced a Euro3.5m investment in a new mixer for its clinker and slag mill located on the port of Dunkirk. The new equipment is intended to further increase the site's production, which has been steadily increasing since it was commissioned in 2012. The mill will manufacture of cement with 40% clinker and 60% ground iron slag. Commissioning is scheduled for January 2019.
Uzbekistan imports more cement 16 August 2018
Uzbekistan: Uzbekistan imported cement worth a total of US$79.8m during the first half of 2018, six times more than in the same period of 2017, according to the State Statistics Committee of Uzbekistan. It was reported earlier that Uzbek cement production had decreased from 4.2Mt in the first half of 2017 to 3.9Mt in the first half of 2018.
Mega cement and marble plant inaugurated in Egypt 16 August 2018
Egypt: Egyptian President Abdel-Fattah al-Sisi inaugurated a cement and marble production complex worth US$1.1bn to the south of Cairo on 15 August 2018. The 500-hectare industrial complex is located 12km north of the Upper Egyptian governorate of Beni Suef.
It took 21 months to complete the complex, which includes three cement plants with a combined annual production capacity of 12Mt/yr. Egypt, through the Armed Forces Engineering Authority, worked together with 20 local and international companies on the project.
During the unveiling ceremony, Sisi said that such industrial projects would help reduce imports, while saving foreign currency and offering thousands of job opportunities to local people.
Chinese global cement influence grows 16 August 2018
There have been quite a few new cement plant project announcements in the past week, with expansions announced in Mexico, Nigeria, Bangladesh, Indonesia, India and Uzbekistan. 11.8Mt/yr of new capacity has been announced in just a week, mostly from a whopping 9.0Mt/yr project in Central Sulawesi, Indonesia, the first in that Province. Notable in this project, as well as two of the others, is the involvement, once again, of large Chinese-based cement plant manufacturers and / or finance and associated influence from Chinese parties.
Of course, this trend is nothing new. The rise of Chinese cement plant manufacturers, particularly into Africa and other developing cement markets, has been covered in previous Global Cement Weekly columns. However, it does appear to be stepping up a notch in 2018 compared to previous years. So far this year we have reported on 21 confirmed Chinese cement plants being built in 15 countries other than China, from the planning stage to ‘up-and-running.’ A total of 37.2Mt/yr, more than the capacity of Germany, is being built across Algeria, Cambodia, Cameroon, Indonesia, Kyrgyzstan, Namibia, Nepal, Nigeria, Pakistan, Russia, Tajikistan, Turkey, Ukraine, Uzbekistan and Zambia. That’s not including a similarly large number of news stories where the supplier is not explicitly stated. This is seen a lot in Indian projects, as well as in Vietnam, where the cement sector appears to still be expanding, despite the government’s pronouncements. In many of these cases, and elsewhere, these unidentified suppliers are likely to be Chinese.
The driver for this increase in Chinese-led cement sector investment is, of course, the severe overcapacity in China’s domestic cement sector. The government is currently undertaking its most drastic capacity reduction measures so far. The ongoing integration of Sinoma and CNBM is one example of the lengths it will go to to reduce the current inefficiencies in the sector. This week the Chinese government reiterated its strict prohibition on new greenfield cement plants. It also warned that any producer that wants to upgrade its plant with a new line must only install the same capacity as the line that will be replaced, amid concerns that some were flouting this rule. This comes as the profits of major producers have been rising. Presumably the government would like them to climb further still.
So where does this leave the more established (read ‘European’) cement plant manufacturers such as Fives, FLSmidth, KHD and thyssenkrupp Industrial Solutions, some of which are fully or partly-owned by Chinese companies? Well, with fewer full-line projects available in developing regions due to the rise of the Chinese, they have become increasingly specialised in specific areas. Those that want European equipment will increasingly specify a pyro-line from Supplier A, a mill or two from Supplier B, conveyors and storage from supplier C, and so on. Arranging this, as it turns out, is something that Chinese plant manufacturers are quite keen to do. Take, for example, FLSmidth working for Sinoma (China) alongside Atlas Copco (Sweden) and Kawasaki Heavy Industries (Japan) on a cement plant in Indonesia. Indeed, FLSmidth signed a framework with CNBM on future collaborations in July 2018. FLSmidth and CNBM already have an extensive ‘back catalogue’ of joint projects. FLSmidth has valuable expertise that Chinese firms need to complete these kinds of projects.
Of course, another European supplier, Germany’s KHD, is mostly owned by China’s AVIC. In a forthcoming interview in the September 2018 issue of Global Cement Magazine, KHD’s CEO Gerold Keune states that the Engineering, Procurement and Construction (EPC) scene is now ‘completely dominated’ by Chinese suppliers. KHD fits in by providing a wide range of equipment but, crucially, great expertise in pyroprocessing and crushing solutions. It itself relies on smaller firms to provide their knowledge to specific parts of a larger project, be it conveyors, feeding systems or silos. Everyone is getting better and better, but in a smaller and smaller area.
Also in the September 2018 issue of Global Cement Magazine will be a report from the VDMA’s Large Industrial Plant Manufacturer’s group (AGAB) in Germany, which highlights another advantage for the Europeans: Digitisation. According to a VDMA survey, the industry anticipates a positive influence from digitisation activities on sales and earnings and expects to see margins improve by up to 10% as a result of the efficiencies it offers over the next three years. In this regard they are ahead of the Chinese mega-suppliers.
The conclusion from this wide-ranging column? The integration of Chinese weight and European know-how is stepping up a notch and will only accelerate from here. Can everyone be ‘winners?’ The next few years may reveal some of the answers.
CCNN to get new Managing Director 16 August 2018
Nigeria: The Cement Company of Northern Nigeria (CCNN) has announced the appointment of Yusuf Binji as its new Managing Director, effective 1 September 2018.
Prior to this appointment, Binji was the Managing Director of Obu Cement Company, a subsidiary of BUA Cement in Okpella, Edo State, a position he has held since February 2017.
Speaking on the appointment, Abdul Samad Rabiu, the Chairman of CCNN Board of Directors, said that Binji’s appointment was part of a restructuring effort aimed at further positioning the company for better business performance.
Binji brings with him almost 30 years experience garnered from the African cement industry, having worked with HeidelbergCement Africa, CCNN and BUA Cement in various capacities.
Binji is a chemical engineering graduate from Ahmadinejad Bello University, Nigeria and also studied at the University College, London, UK. He is a fellow of Nigerian Society of Engineers, the Solar Energy Society of Nigeria and the Nigerian Society of Chemical Engineers. He is also a registered engineer with the Council for Regulation of Engineering in Nigeria (COREN) and an associate member of the UK’s Institution of Chemical Engineers.
New President for Eagle Materials 16 August 2018
US: Eagle Materials Inc. has announced that Michael Haack has been named as its new President in addition to his role as Chief Operating Officer (COO). The announcement was made by Dave Powers, Eagle’s Chief Executive Officer (CEO). "Michael has been serving as our COO since 2014 and has distinguished himself across all of our lines of business,” said Powers. “This expansion of Michael's role reflects the company's significant growth in recent years and the opportunity to build our leadership capacity, as we extend Eagle's track-record as the benchmark operating performer in the industry."
Michael Haack added, "I am excited to take on this expanded responsibility, as we continue to pursue our well-established strategy of value creation and capitalise on the many opportunities we see ahead."
Prior to joining Eagle, Haack spent 17 years at Halliburton Energy Services, holding successively senior operating positions, culminating with the management of Global Operations for Sperry Drilling, a multi-billion dollar company in the drilling and evaluation division of Halliburton. Haack holds a Master of Science degree from Texas A&M University and a Bachelor of Science degree from Purdue University, both in Industrial Engineering, as well as an MBA from Rice University.
New grinding plant for Elementia 16 August 2018
Mexico: Elementia has said that it will install a new cement grinding plant in Yucatán. It will invest US$30m and will start at a capacity of 0.25Mt/yr. Commercial operation is expected within the first half of 2019.
Carrots could be used in low emission cement 16 August 2018
UK: The Times has reported on preliminary tests at Lancaster University, Lancashire, UK, which indicate that adding nanoplatelets from carrots and/or sugar beets to concrete significantly enhances its strength.
Including nanoplatelets is reported to increase the concentration of calcium silicate hydrate, leading directly to stronger cement. The researcher reported that, when platelets are added, 40kg less cement is required to make a cubic metre of concrete with the same strength as a sample that does not contain nanoplatelets. This leads to lower CO2 emissions.
The team added that nanoplatelets performed better than other additives, such as graphene. The concrete made also had a denser microstructure, which helps to prevent corrosion, extending concrete life.
Cemex Go launches in Costa Rica 16 August 2018
Costa Rica: Mexico’s Cemex has introduced its Cemex Go platform to the Costa Rican market. The new platform will enable customers to place orders, make payments, manage invoices and track deliveries in one place online. The new platform is available for mobile phones, tablets and computers. It has already been launched in nine countries and has over 13,000 users worldwide.