Displaying items by tag: CarbonBuilt

It has been a busy week for carbon capture in the cement sector with Global Cement covering five stories. However, increasingly, the topic has become a regular feature in the press as the industry bends to the demands of the carbon agenda. This week’s selection is notable because three of the stories cover North America.

Holcim US announced that it is working with Ohio State University and GTI Energy to design, build and test engineering-scale membrane carbon capture technology at the Holly Hill cement plant in South Carolina. The information builds on an earlier release from the US Department of Energy’s (DOE) Office of Fossil Energy and Carbon Management (FECM) in late December 2023 about the project. It has a total budget of US$9m, with US$7m supplied by the DOE. It plans to build a 3t/day CO₂ capture unit that uses a method intended to retain 95 - 99% of CO₂ from cement kiln gas with a purity exceeding 95%. The new information at this stage is that GTI Energy is involved. Specifically, it will support the development of the pilot skid for site deployment.

The other two stories from North America are worth noting because they both concern commercial equipment or technology suppliers joining up to work together. First, 10 companies - Biomason, Blue Planet Systems, Brimstone, CarbonBuilt, Chement, Fortera, Minus Materials, Queens Carbon, Sublime Systems, and Terra CO₂ - announced they were launching the Decarbonized Cement and Concrete Alliance (DC2). The group’s principal aim is to lobby the US government toward using new low-carbon cement and concrete products in public infrastructure. It also intends to look at advocacy and public sector engagement including expanded tax credits, development of standards for novel cements, consistent ecolabeling and accounting, and customer demand support. DC2 was formally launched in January 2024 but it follows previous work by the companies in the area. The other related story was a memorandum of understanding that Aker Carbon Capture and MAN Energy Solutions have also signed this week to jointly pursue opportunities related to carbon capture, utilisation and storage (CCUS) and CO₂ compression in the North American market. These two companies have worked on the full-scale CCUS unit at Norcem’s Brevik cement plant, which is due to be commissioned later in 2024. They are likely intending to capitalise on the publicity that is likely to be generated once it officially starts up.

Back in North America the DC2 Alliance noted in its press release the DOE’s release of its Pathways to Commercial Liftoff: Low-Carbon Cement report in September 2023. Although it is similar to many other varied sector roadmaps, including the Portland Cement Association’s Road to Net Zero that was released in 2021, this document is well worth reading due to its details and local market context. The headline figure, for example, is that following a set of pathways to fully decarbonise the US cement industry would cost US$60 - 120bn by 2050. Doing so would involve reducing the clinker factor, improving energy efficiency, increased use of alternative fuels, using CCUS, using alternative feedstocks and adopting alternatives to traditional cement production methods.

Graph 1: US active cement kilns by capacity and age. Source: PCA survey data used in Department of Energy Pathways to Commercial Liftoff: Low-Carbon Cement report.

One other interesting tidbit to consider from the report is an analysis of the age of the US cement sector’s kilns versus their production capacity as shown in Graph 1 above. The largest 10 kilns in the country account for 22% of the country’s total capacity and these were all built after 2000. Then, the next 44% of the national capacity comes from 38 kilns out of a total of 120 kilns at 98 cement plants. The report itself does not make this assertion but the implication is that retrofitting CCUS units at one third of the country’s clinker lines would capture the CO2 being emitted from two-thirds of the sector’s production capacity. This is not to say that this could actually work technically, logistically or economically. Yet seeing the scale of the challenge presented in this way is fascinating and one starts to have thoughts about how a retrofit roll-out of CCUS units might actually be approached.

Whether the cement sector adopts CCUS at scale remains to be seen but demonstration projects are definitely coming in both Europe and North America. The DOE report from September 2023 suggests that decarbonisation will cost a lot of money. No surprises there and, as ever, there is rather less detail on who will actually pay for this. One thing that might help here, that the DOE report mentions frequently, is the 45Q carbon capture tax credit scheme, which was introduced by the Trump administration in 2020. Regardless of the potential bill for consumers of cement though, the suppliers are clearly taking note of the investment potential as evidenced by all the non-cement plant CCUS news stories this week.

The 1st Global CemCCUS Conference will take place 13 - 15 May 2024 in Norway and it will include a plant tour of the Norcem Brevik cement plant and CCS project

North America: A new coalition for the scaling and deployment of low-carbon building materials, the creation of new clean cement and concrete jobs and the promotion of environmental justice launched earlier in January 2024. Called the Decarbonized Cement and Concrete Alliance (DC2), it comprises alternative cement developers Biomason, Brimstone, Chement, Fortera and Terra CO₂, sequestration company Blue Planet Systems, circular concrete producer CarbonBuilt, biogenic limestone producer Minus Materials, hydrothermal processing technology developer Queens Carbon and electrified cement production technology developer Sublime Systems. DC2’s areas of engagement in policy will include tax credits, standards, ecolabeling and subsidisation, in line with the US Department of Energy’s Pathways to Commercial Liftoff: Low-Carbon Cement strategy.

CarbonBuilt’s government and community affairs manager Sal Brzozowski said “DC2’s platform of robust policy, standards and incentives to scale innovative solutions will not only accelerate deep decarbonisation, but also transform the concrete industry from one of the world’s largest CO₂ emitters to one of the world’s largest carbon sinks.”

US: Block-Lite plans to install a system to cure concrete blocks using direct air capture (DAC)-sourced CO₂ at its Flagstaff, Arizona, concrete block plant. The upgrade will implement CarbonBuilt’s low-CO₂ concrete production technology and AirCapture’s modular DAC technology, across five or six capture units. Direct air capture will thus remove 500 – 600t/yr of CO₂ from the atmosphere, while process changes will reduce CO₂ emissions from the Flagstaff plant by over 2000t/yr. The project has attracted fundraising from the 4 Corners Carbon Coalition (4CCC), with a goal of US$50,000. The Arizon Daily Sun newspaper has reported that Block-Lite plans to supply its first shipment of low-CO₂ blocks to a 50-home development by Habitat for Humanity in Flagstaff.

US/Canada: XPrize has named CarbonBuilt and CarbonCure Technologies as the winners of carbon capture and storage (CCS) design prizes worth US$20.0m. The competition ran at two power plants in Wyoming, US and Alberta, Canada. CarbonBuilt won the contest at the Wyoming plant with a concrete-curing based system. The concrete produced has a lower carbon footprint than conventionally produced concrete, according to XPrize. CarbonCure Technologies won the Alberta contest with a design based on carbonating the water used in washing cement trucks. This reportedly formed a concrete-strengthening slurry.

XPrize has partnered with Elon Musk and the Musk Foundation to launch a second round of CCS design prizes worth a total US$100m.