Displaying items by tag: grinding plant

Iraq: Iran’s Khuzestan province plans to invest in a US$35m cement plant project in Al-Emareh. Deputy Governor General for Coordinating Economic Affairs Nourollah Hassanzadeh said it was a joint initiative with Iraq, according to the Islamic Republic News Agency (IRNA). The project was launched in the mid-2010s and is reported to be in its ‘final’ stages. The Iranian province borders Iraq and it hopes to increase its international investment profile.

India: Birla Corporation and its subsidiary RCCPL have acquired a 26% stake in AMPSolar Clean Power. The cement producer plans to buy solar power for its Raebareli cement grinding plants and its Kundanganj cement grinding plant.

Bangladesh: Mohammed Amirul Haque, the managing director, of Premier Cement, says that the company has built two more units at Narayanganj and Chattogram for around US$150m. He said that upgrade has increased the company’s production capacity to 5.2Mt/yr from 2.4Mt/yr, according to the Daily Star newspaper. The new units are currently at the trial stage. Vertical roller mills (VRM) supplied by Denmark’s FLSmidth will be used to attain production rates of 460t/hr and 270t/hr at the new plants in Narayanganj and Chattogram respectively.

The expansion plans were initiated in 2017. At present the country has a cement production utilisation rate of 57%. Bangladesh’s per capita cement consumption is around 181kg. It is expected to increase to 220kg by 2020.

India: The India Cements, south India's largest cement maker by volume, has stated that it may have to delay its planned capital expenditure projects, if the Indian economy continues its relative ‘slump.’ The company’s proposed projects include an investment of US$195m on a greenfield plant in Madhya Pradesh and a grinding plant in Uttar Pradesh.

India is going through what many consider to be a ‘unprecedented’ economic slowdown following GDP growth of ‘a mere 5% in the third quarter of 2019, a six year low. This has led to a slowdown in government spending, directly affecting cement consumption and capacity utilisation rate at The India Cements’ plants.

“We may hold back capital expenditure," said N Srinivasan, the company’s Vice Chairman and Managing Director. “I want to expand. I want to go there, but I want to be sure before I go!"

Sweden: Construction and engineering conglomerate Peab’s subsidiary Swecem has engaged German-based Gebr. Pfeiffer for the supply of one MVR 2500 C-4 grinding mill at its granulated blast furnace slag (GBFS) grinding plant in Oxelösund in Södermanland. The mill has four grinding rollers and a table diameter of 2.5m, giving it a 25t/hr slag grinding capacity.

Swecem operates a concrete plant in Kungsängen. It currently uses ground granulated blast furnace slag (GGBFS) supplied by Irish-based Ecocem’s 0.7Mt/yr Dunkirk grinding plant in France.

India: JK Cement is awaiting environmental clearance to commence construction of a 2.0Mt/yr grinding plant at Aligarh in Uttar Pradesh. The project has been valued at US$37.5m. Domex has reported that FLSmidth is in the process supplying machinery to the facility, for which civil work has been completed. Its 2.0Mt/yr Ordinary Portland and Portland Pozzolana Cement production capacity will bring JK Cement’s installed capacity to 12.9Mt/yr. It already grinds 3.0Mt/yr of clinker at its Mudhol grinding plant near Bagalkot in Karnataka.

The Australian cement supply spat calmed down a little this week with the announcement that Wagners Holdings has agreed to resume the supply of cement products from its Pinkenba grinding plant in Brisbane to Boral. Legal proceedings are still on-going with a trial date set at the Supreme Court of Queensland in late November 2019.

The argument blew up publicly in March 2019, when Wagners said it had suspended its cement supply to Boral for six months. Wagners has a cement supply agreement with Boral whereby it supplies cement on an annual basis for a fixed price. However, Boral informed Wagners that it had found cheaper cement from a ‘long established’ supplier in South East Queensland. Local press speculated that this ‘long established’ supplier was Cement Australia, the joint venture between LafargeHolcim and HeidelbergCement. Wagners then had the choice to either match the lower price or suspend its supply. The disagreement took the legal route as the parties failed to reach an agreement. Wagner says that its cement supply agreement with Boral ‘remains binding on both parties’ until 2031.

Wagners later reported that it expected the suspension to cost it around US$7m in 2019. The deal with Boral constituted about 40% of its cement sales volumes. Its overall revenue grew year-on-year in its 2019 business year to the end of June 2019 but its cement sales volumes fell. Its earnings also fell. This was blamed on higher activity in lower margin areas such as contract haulage and fixed plant concrete, and delays in major infrastructure project work in South-East Queensland.

Boral, meanwhile, suffered from falling revenue and earnings from its Boral Australia subsidiary in its financial year to June 2019 due to a slowing construction market. Notably, its cement sales revenue rose by 7% due to ‘favourable’ pricing, higher volumes and cost-saving programs. It didn’t say whether the cost cutting included sourcing cement from a different supplier! All of this though was counteracted by lower contributions from its Sunstate joint venture (JV) with Adelaide Brighton and higher fuel and clinker costs.

All of this is fascinating because these kinds of disputes usually remain out of the public eye. The large size of Wagners’ cement supply deal with Boral meant that when it was threatened it likely had to tell its shareholders due to the potential financial impact. Whether Boral can wriggle out of the contract is now a matter for the courts.

The broader picture is that even though Boral Australia’s cement division seemed to be growing in its 2019 financial year it was still trying to reduce its costs in the face of a decelerating construction market. Added to this, the companies hold both a supplier and a competitor relationship. On the production side Boral operates an integrated plant at Berrima in New South Wales (NSW), a grinding plant at Maldon, NSW and another grinding plant in its Sunstate JV at Brisbane, Queensland. Wagners runs its own grinding plant at Pinkenba, Queensland. Both companies operate concrete plants. This is not unusual for a concentrated industrial sector like cement but it creates problems for the regulators. Note that, also this week, the Australian Competition and Consumer Commission was reportedly paying attention to the links between Barro Group and Adelaide Brighton. Barro owns a 43% stake in Adelaide Brighton but the authorities are concerned about a possible overlap in the two companies’ roles as suppliers of cement, concrete and aggregates. Any slowdown in construction in Australia seems likely to heighten these kinds of issues.

Interesting news from Holcim Mexico this week with the announcement that it is planning to invest US$40m towards building a 0.7Mt/yr grinding plant in the state of Yucátan. The unit will be supplied with clinker from Holcim Mexico’s Macuspana and Orizaba integrated cement plants. This follows the news in August 2018 that Elementia’s cement company, Cementos Fortaleza, had started to build a new 0.25Mt/yr grinding plant at Merida in Yucatan. That project has a budget of US$30m.

These two projects offer a contrast to comments made by the head of Cemex Mexico, Ricardo Naya Barba, who was lamenting the state of the market to local press at the start of the month. He said that sales volumes of cement, concrete and aggregates had fallen by 12 – 15% in the first seven months of 2019. He blamed the decline partly on falling national infrastructure investment. This marked a slight improvement on Cemex’s Mexican results for the first of 2019 where sales, sales volumes and earnings were all down. At this time as well as slowing infrastructure projects the situation was also attributed to a residential sector hit by the slower-than anticipated start of the new programs.

Elementia’s Mexican cement business, Cementos Fortaleza, reported a similar picture in the second quarter of 2019. Its net sales fell by 6% year-on-year to US65.4m from US$69.7m. This was attributed to a market contraction affecting all of Elementia’s businesses in the country, as well as the redefinition of its core products for the Building Systems business unit. Earnings fell also and this was further attributed to mounting energy and freight costs. Cementos Moctezuma faced many of the same issues. Its cement sales fell by 13% to US$147m in the second quarter of 2019. It is expecting a similar picture for the remainder of the year.

Data from the National Institute of Statistics and Geography (INEGI) shows that the value of cement sales in Mexico fell by 7% year-on-year to US$1.21bn in the first quarter of 2019 from US$1.30bn in the same period in 2018. Cement sales volumes fell by 8.2% to 10.9Mt from 11.9Mt. This was the lowest figure since 2014.

The one larger Mexican cement producer that doesn’t seem to have been overly troubled so far in 2019 is Grupo Cementos de Chihuahua (GCC). Earlier in the year the company was considered to be the Mexican cement producer most at risk from potential US tariffs due to higher reliance on exports than its competitors. Yet Mexico’s National Chamber of Cement (CANACEM) publicly said that that it didn’t consider US tariffs a significant barrier to the local industry. GCC reported growing net sales and cement sales volumes in the second quarter of 2019 due to industrial warehouse construction, mining projects and middle-income housing at the northern cities.

Two new grinding plants in a particular region of Mexico don’t necessarily reflect the state of the country’s industry as a whole. Yucatan may suit the grinding model due to a lack of raw materials or strong shipping links. The region may also be defying the gloomy national state of affairs in the construction sector. Alternatively, producers may be chasing low-cost and low-risk expansion plans in a tough market. The grinding model wins out over the clinker producing one in this scenario. In the wider picture in August 2019 Cemento Cruz Azul ordered two petcoke grinding mills from Germany’s Loesche and Austria’s Unitherm Cemcon said it had been awarded the supply of an MAS DT burner to an unnamed cement plant. These suggest that, although the sector may be having a bad year so far, things are expected to get better.

Slovenia: Swiss-based LafargeHolcim’s Slovenian subsidiary Lafarge Slovenia has submitted an application for an environmental permit for its 0.5Mt/yr Cementarna Trbovlje grinding plant. Business News Europe has reported that the company hopes to resume grinding, storage and dispatch at the facility, which went out of operation after losing its environmental permit in late 2014. “The plant will no longer produce raw materials itself, but source them from elsewhere, along with other cement additives,” said operations manager Čeprav Delo.

Nigeria: Aliko Dangote, the chairman of Dangote Cement, plans to increase his company’s cement production capacity in Africa by 29% to 62Mt/yr. It aims to add 6Mt/yr in Nigeria in 2020 to support exports to grinding plants in Cameroon and West Africa, according to Bloomberg. The cement producer previously said it had a production capacity of 45.6Mt/yr in 2018 from operations in 10 countries.