Germany: Norway-based Capsol Technologies has won a feasibility study from a German cement producer to assess the implementation of its CapsolEoP (End-of-Pipe) technology at a cement plant. The technology aims to capture 400,000t/yr of CO₂.

CEO Wendy Lam said "Capsol continues to build a position as a preferred carbon capture technology provider for the cement industry."

India: JSW Cement has commissioned another 2Mt/yr of grinding capacity at its Vijayanagar plant in Karnataka, increasing the plant's total capacity to 6Mt/yr. The expansion, which cost US$55m, increases the company's overall capacity to over 20Mt/yr.  JSW Cement was set to raise US$476m through an initial public offering (IPO), but the Securities and Exchange Board of India has placed the IPO plans ‘in abeyance’ as of September 2024, according to the Economic Times. Funds from the IPO were earmarked for debt repayment and financing a new unit in Nagaur, Rajasthan.

Chief executive officer Nilesh Narwekar said "This new capacity at Vijayanagar is a significant step towards increasing our overall capacity to 40.8Mt/yr while maintaining our commitment to sustainability."

Saudi Arabia: Turboden, a subsidiary of Mitsubishi Heavy Industries, has announced its first project in Saudi Arabia — a 13MW organic rankine cycle (ORC) power plant at Riyadh Cement Company. This marks the first ORC plant in the Kingdom and the largest globally.

The plant will capture residual heat from the cement plant's clinker coolers and pre-heaters (2 kilns of 5000t/day each), offering high energy efficiency and eliminating water consumption. Sinoma Energy Conservation serves as the project's engineering, procurement and construction contractor.

General manager Andrea La Gioia said "Turboden is honoured to spearhead this groundbreaking project in collaboration with Riyadh Cement Company. With around 460 ORC plants in 52 countries, 50 in ‘waste’ heat recovery application, our ORC technology represents a game-changer in the global energy landscape, and we are proud to support the Kingdom of Saudi Arabia in its transition towards cleaner, more sustainable energy sources."

India: UltraTech Cement will procure an additional 7MW of wind-solar hybrid power production capacity from Continuum MP Windfarm, increasing total procurement from 14MW to 21MW. This power is supplied from its 100MW project in Ratlam District in Madhya Pradesh. To facilitate this, UltraTech has raised its shareholding in Continuum MP Windfarm from 3.28% to 5.46% by investing approximately US$2.9m. The acquisition is expected to complete within 120 days following amendments to the power purchase Agreement, share purchase agreement, and shareholders agreement.

Ghana: The Minister of Trade and Industry, Kobina Hammond, has directed cement manufacturers to secure licences or cease operations immediately, in compliance with the new Ghana Standards Authority's (GSA) Manufacture of Cement Regulation, 2023 (LI 2480). This regulation mandates re-registration and licensing of existing operations and bars unlicensed new plants. It came into law in 2024 and seeks to address consumer concerns over rising cement prices and promote quality assurance.

Director-General of the GSA, Alex Dodoo, stated that all current manufacturers are operating illegally without a licence. Dodoo said that none of the cement producers in the country had applied for a licence to operate in accordance with the law.

Czech Republic: Holcim Česko, owner of the Čížkovice cement plant, will construct a new calcined clay processing line with an investment of US$44m, marking the largest investment in its history. The project, beginning in January 2025 and aiming for completion by the end of 2026, aims to reduce energy use and end reliance on fossil fuels. The Czech Ministry of the Environment has contributed US$14.5m towards the construction.

Holcim Česko CEO Miroslav Kratochvil said "The new calcined clay processing line represents a revolutionary step in the cement industry. Calcined clays will become a key material in our company's new cement products and will have a significantly lower carbon footprint. This innovation will enable the company to make a significant contribution to environmental protection and emission reduction."

Austria: Holcim is set to significantly reduce its carbon footprint with the installation of a new clinker cooler system and a large-scale photovoltaic system at its Mannersdorf cement plant. The clinker cooler project is valued at approximately €10m, and aims to cut heat consumption and reduce CO₂ emissions by 18,000t/yr. Completion is expected in early 2025. The solar project will be fully operational by 2025, and will cover approximately 15% of the plant’s energy needs and reduce CO₂ emissions by an additional 12,700t/yr. 2.7MW of solar panels were erected at the site of the former chimney on the plant’s premises.

Plant manager Helmut Reiterer said "Sustainability requires decarbonisation, i.e. continuously reducing the CO₂ emissions from our production activities. We are placing an investment focus on energy-efficient production by modernising our machinery, but also on expanding green energy."

Egypt: Starting in October 2024, the Egyptian Ministry of Petroleum and Mineral Resources will centralise distribution of mazut to cement plants to ensure continued operations amidst the country's power shortages. Deputy PM Kamel El Wazir announced the plan, responding to requests from cement producers for a reliable fuel supply to maintain the stable production and distribution of cement.

Cement plants are required to submit a report on quarry material prices over the past three years, highlighting price increases and their impact on the industry. The Cement Division of the Building Materials Industry Chamber also requested consistent export support payments, the extension of investor rights to quarry resources, and the testing of pozzolanic cement for standard compliance.

Brazil: Votorantim Cimentos has launched Blenture, a new brand of cement and concrete designed to reduce CO₂ emissions and promote sustainable construction practices. Blenture products, developed through significant investment in research and development, align with the company’s decarbonisation strategy to utilise recycled materials and non-fossil fuels. Blenture cements and concretes, certified with environmental product declarations by AENOR, reportedly offer a 30% lower carbon footprint while maintaining quality, strength and performance.

Brunei: Heidelberg Materials Butra Sdn Bhd has become the first cement producer to receive a ‘green’ label certification for its Portland composite cement. The Singapore Environment Council awarded the certification, which recognises products meeting stringent environmental standards such as lower carbon emissions and sustainable material use.

Managing director of Heidelberg Materials Butra, Terence Ong, said “By offering environmentally responsible products, we aim to contribute to the nation’s infrastructure development while minimising our ecological footprint.”