US: The Netherlands Verder Group has entered into an agreement to acquire US-based Microtrac and Japan’s MicrotracBEL from Nikkiso. Verder's Scientific Division will extend its product portfolio with product lines for particle characterisation by laser diffraction, dynamic light scattering and surface analysis.

“With Microtrac and MicrotracBEL two technological leaders in particle and surface analysis are united under the roof of Verder Scientific. We look forward to welcoming the Microtrac and MicrotracBEL teams to our group. Both companies will have access to additional resources to push international expansion and extend its innovative product range”, said Jürgen Pankratz, chief executive officer (CEO) of Verder Scientific.

Microtrac is a manufacturer of instruments for particle analysis that use laser diffraction and dynamic light scattering technologies. The instruments are used both for industrial applications and material research. Microtrac has two units in the US at Montgomeryville and York in Pennsylvania

MicrotracBEL is a manufacturer of instruments for surface area and porosity analysis applying adsorption technologies. The instruments are used in research intense fields for particle characterisation. MicrotracBEL has three units in Japan based in Osaka, Tokyo and Nagoya.

Microtrac and MicrotracBEL will maintain their headquarters in the US and Japan respectively and these locations will also be used to support further expansion of the Verder Group. The existing Mictrotrac and MicrotracBEL management team will continue to be in charge. No value for the transaction has been disclosed.

India: GE Power India has been award a contract by Aravali Power worth US$107m for a flue gas desulphurisation (FGD) system. The contract is for design, engineering, civil work, supply, erection and commissioning of wet FGD systems along with auxiliaries like limestone and gypsum handling systems and wet stack on full turnkey basis.

Aravali Power is a joint venture company between NTPC, Haryana Power Generation Company and Indraprastha Power Generation Company. It operates a coal power station near Jharli, Jhajjar in Haryana with three 500MW units. An additional two 660MW units are planned for a future expansion project.

Mexico/US: Yanina Navarro, the general director of the National Chamber of Cement (CANACEM), says that Mexican cement producers are not worried by US tariffs on imports. Mexico exports 1.42Mt or 3.4% of its total production of 44Mt/yr to its neighbour, according to the EL Financiero newspaper. Data from the United States Geological Survey (USGS) placed Mexico at the fifth largest exporter of cement to the US after Canada, Turkey, China and Greece.

Grupo Cementos de Chihuahua (GCC) could be affected more than other Mexican producers by any tariffs as 17% of its production is exported to the US. Mainly this covers production from plants at Samalayuca and Juárez in Chihuahua. Hoevever, GCC operates five plants in the US, which would enable it to reduce the potential negative affects of tariffs.

Dominican Republic: Cementos Argos has opened a new packaging plant to support its Najayo grinding plant. The unit has a capacity of over 1000bags/hr. It also improves dust collection efficiency compared to the previous system. The Colombian cement producer operates two ready-mix concrete plants and a cement grinding plant in the country.

Mexico: Cemex says it has completed the global deployment of its digital platform Cemex Go. The product is available in 21 countries with 96% of the company’s total recurring customers using it. 45% of Cemex’s total global sales are processed through the platform, over half a million payments are completed through it per year and 1.5 million deliveries use the system annually.

“We are incredibly proud that our vision of providing a superior customer experience enabled by digital technology has been deployed to our customers around the world. Cemex Go has proven itself as a game changer, an established and essential tool for our customers, accessible anywhere, any time to help them run their businesses with increased efficiency,” said Fernando A Gonzalez, chief executive officer (CEO) of Cemex. He added that platform was only part of the ‘initial’ stages of the company’s digital transformation plans.

Nigeria: Dangote Cement has published its first sustainability report following Global Reporting Initiative (GRI) standards. Key data from the report include a CO₂ emissions per tonne of cementitious material of 687kg CO₂/t across all operations. Its total CO₂ emissions were 16.4Mt. In 2017 it reported estimated total CO₂ emissions of 8.45Mt from its domestic operations. The cement producer had an energy consumption of 52M GJ 2018. It had a 49% production capacity utilisation rate at its Nigerian plants. The group said that it supported 37,000 direct, indirect and induced jobs in Nigeria.

Spain: Cementos Molins says that 13 of its 14 directors want to keep the company’s headquarters in Madrid following a request by a minority shareholder. This represents a hardening by the board on the issue following its move from near Barcelona in 2017, according to Crónica. The cement producer decided to move its registered address away from Sant Vicenc dels Horts in Catalonia following moves by the regional government to push for independence.

Italy: Buzzi Unicem says its ready-mix concrete subsidiary Unical has completed the largest continuous concrete casting in Europe at the Galeazzi Orthopedic Institut project in Milan. It pumped 33,000m³ of concrete continuously for 94 hours including 3300 concrete mixer journeys with 106 Unical staff on duty. The new 16-storey building will have a height of 90m once completed.

Morocco: Cement sales in Morocco during the first four months of 2019 have reached 4.8Mt, an increase of nearly 6% compared to the same period of 2018. April 2019 was the fourth straight month of improved sales. The increase reverses the trend seen in the previous two sets of four-month statistics, which saw falling volumes year-on-year in both 2017 (5.3% decrease) and 2018 (5.5% decrease).

Philippines: Republic Cement and Nestlé Philippines have signed an agreement to co-process Nestlé’s post-consumer plastic waste in Republic Cement’s cement kilns. The deal was signed by Nestlé Philippines’ Chairman and CEO Kais Marzouki, its Corporate Affairs Head Attorney Ernesto Mascenon and Republic Cement’s Renato Sunico and Nabil Francis, CEO of Republic Cement Services. In April 2018, Nestlé globally announced a commitment that 100% of its packaging will be recyclable or reusable by 2025. The company's vision is that none of its waste ends up in landfill or as litter.

“Nestlé is aiming for plastic neutrality, essentially recovering plastics equal to what we produce,” said Kais Marzouki. “Aside from our current collection and recycling initiatives, we believe this effort will help us gather and co-process bigger volumes of post-consumer waste. We target to divert more post-consumer waste from landfills and the ocean. This partnership will contribute positively in helping clean up the Philippines.”

“We are happy to partner with Nestlé Philippines and to help address the pollution from residual plastics and sachets,” said Nabil Francis. “This is a win-win situation for us and the environment. Together, we can build a greener, stronger republic.”