US: ASGCO has launched its Grizzly Screw-Splice, a conveyor belt splicing and fastening system. The splice is available in various rubber compounds with a tensile strength of up to 1650PIW. The supplier says that the product is stronger, wears less and has a lower-profile silhouette than traditional metal fasteners for conveyor belts. It features self-tapping and self-drilling screws that uphold the toughness of the conveyor belt by passing through the belt carcass instead of creating holes.

India: Dalmia Cement plans to invest US$75.2m in a 2.6Mt/yr expansion to its Bokaro grinding plant in Jharkhand. The company says that the work will increase the plant’s capacity by 70% to 6.3Mt/yr from 3.7Mt/yr. US$33.2m will go towards the installation of new solar power plant. The company will also set up a waste management facility at the site, using US$1.06m of the investment.

Managing director Puneet Dalmia said “As we are further investing in the Eastern India market to participate in its economic growth story, we are also taking our corporate responsibility seriously by placing the utmost importance on environmental protection and social impact. We are confident that the employment generated through our investments and the skill enhancement in our social initiatives will help create a progressive ecosystem where we help people become independent and self-sufficient. We are excited and look forward to partnering with the state to achieve our business, social and sustainability goals.”

Philippines: The Philippines Department of Trade and Industry has enacted a temporary duty on some imports of cement from Vietnam. The Manila Times newspaper has reported that the measure will be in force until April 2022 and only apply to ‘dumped’ cement. Importers will pay a duty of between US$1.02/t and US$10.50/t on ordinary Portland cement and between US$1.16/t and US$12.80/t on blended cement.

The measure follows a probe carried out on the basis of a petition by domestic cement producers APO Cement, Holcim Philippines, Republic Cement and Solid Cement. The probe found that the domestic cement industry had suffered a loss of market share and declining domestic sales between July 2019 and December 2020.

Trade Secretary Ramon Lopez said "We do not anticipate that these duties will result in an increase in the retail price of cement, because its effect on landed cost is minimal.” He added “Any price increases in imported cement will be discouraged by competition from domestic cement producers. The provisional anti-dumping duties will be imposed only on specific Vietnamese exporters found to be dumping cement to the Philippines. Vietnamese exporters who are not dumping can continue to export cement without having to post the provisional anti-dumping cash bond.”

India: Udaipur Cement Works has increased its solar power generation capacity by 43% through the installation of a new 4.35MW solar power plant at its Udaipur cement plant in Rajasthan. The 1.4Mt/yr cement plant now has a total solar power capacity of 14.5MW. Udaipur Cement Works says that solar power generated at the plant will reduce it operations’ CO₂ footprint by 14,000t/yr.

India: The Indian Green Building Council (IGBC) has certified the sustainability claims of Dalmia Cement’s portfolio of blended cements. The portfolio consists of composite cement, Portland pozzolan cement and Portland slag cement. The council employed a full-cycle assessment of the cements’ impacts.

Head of sales, marketing and logstics Sanjay Wali said “We see GreenPro’s accreditation as a milestone in our journey to becoming carbon-negative by 2040. This also reaffirms our blended cement products’ green supremacy, which is accelerating the global transition from a grey to green reality.”

Kenya: Affordable housing joint venture 14Trees and UK-based development finance company CDC Group have 3D printed a complex of 52 houses near Kilifi, Kilifi county. The development, called Mvule Gardens, uses an IFC-EDGE Advanced-certified sustainable design to support the ecological regeneration of its locale. Swtizerland-based Holcim, which holds a stake in 14Trees, supplied its TectorPrint ink for use in buildings’ walls to increase strength.

Holcim CEO Jan Jenisch said “We are excited to be building one of the world’s largest 3D-printed affordable housing projects in Kenya. With today’s rapid urbanisation, over 3bn people are expected to need affordable housing by 2030. This issue is most acute in Africa, with countries like Kenya already facing an estimated shortage of 2m houses. By deploying 3D printing, we can address this infrastructure gap at scale, to increase living standards for all.”

Uzbekistan: China-based Anhui Conch has started building a 2.5Mt/yr cement plant in Akhangaran district in Tashkent. It will invest US$200m in the upcoming plant, of which it has already spent US$16.7m on imported equipment, according to the Podrobno news agency. The plant will occupy a 183ha site.

Argentina: Loma Negra has inaugurated the second production line at its L’Amalí cement plant. The El Cronista newspaper has reported that the InterCement subsidiary invested US$350m in the line, which expands the plant’s capacity by 40%. It previously started up the new line’s kiln in June 2021 but was later forced to suspend all clinker production at the plant due to a union dispute. It previously said it was close to commissioning the grinding mill and despatch unit for the line in August 2021.

India: UltraTech Cement plans to increase the production capacity at its Maihar cement plant by 50%. Denmark-based FLSmidth will carry out the expansion project, which also involves the installation of a new calciner and JetFlex burner, along with other pyroprocessing equipment. The supplier says that the upgrade will facilitate greater alternative fuel substitution at the plant in Madhya Pradesh.

FLSmidth’s cement president Carsten Riisberg Lund said “We are pleased to continue our long-lasting collaboration with UltraTech Cement. With the new upgrades to the pyro sections, installing MissionZero flagship offerings, such as the low-NOx calciner and JetFlex burner, UltraTech makes a significant investment in future-proofing its sustainable production.”

Canada: France-based Fives FCB has secured a contract to upgrade the grinding unit at Ciment Québec’s Saint Basile integrated plant in Quebec. The supplier will install two FCB Horomill grinding workshops with FCB TSV 5000 THF classifiers, FCB aerodecanters and flash dryers and Fives TGT process filters. It said that its mills met the customer’s specifications: namely zero water use; minimum power consumption; data processing; and full automation with rapid recipe change.

Ciments Québec president and chief executive officer Luc Papillon said “After a thorough technical review of the various technologies available today for cement grinding, we have selected the Horomill, being confident that it is the best adapted solution for our multiple cements portfolio and our quest to reduce our cement environmental footprint.”